Yamaha YZ85 2021 Owner's Manual page 30

Instrument and control functions
4
1. Distance A
Spring preload:
Minimum (soft):
Distance A = 218.5 mm (8.60 in)
Standard:
Distance A = 210.0 mm (8.27 in)
(YZ85LWN)
215.0 mm (8.46 in) (YZ85N)
Maximum (hard):
Distance A = 202.0 mm (7.95 in)
4. Tighten the locknut to the speci-
fied torque. NOTICE: Always
tighten the locknut against the
adjusting nut, and then tighten
the locknut to the specified
torque.
[ECA10122]
Tightening torque:
Locknut:
30 N·m (3.0 kgf·m, 22 lb·ft)
5. Install the air filter joint in its origi-
1
nal position, and then tighten the
clamp bolts.
TIP
Align the projection on the air filter joint
with the projection on the frame guide.
1 1
2 2
3 3
1. Frame guide
2. Air filter joint
3. Projection
Rebound damping force
Turn the adjusting screw in direction (a)
to increase the rebound damping
force.
4-12
Turn the adjusting screw in direction (b)
to decrease the rebound damping
force.
To set the rebound damping force, turn
the adjuster in direction (a) until it
stops, and then count the clicks in di-
rection (b).
(b) (b) (b)
1. Rebound damping force adjusting screw
Rebound damping setting:
Minimum (soft):
20 click(s) in direction (b)
Standard:
10 (YZ85LWN)
6 (YZ85N) click(s) in direction (b)
Maximum (hard):
1 click(s) in direction (b)
(a) (a) (a)
1 1