Date Stamping Snapshots - Casio Exilim EX-Z8 User Manual

Date Stamping Snapshots

You can have the snapshot's recording date only, or date and
time stamped in the lower right corner of the image.
1.
In the REC mode, press [MENU].
2.
On the "Set Up" tab, select "Timestamp" and
then press [ ].
3.
Use [ ] and [ ] to select the setting you want
and then press [SET].
Example: December 24, 2007, 1:25 p.m.
To do this:
Display the date only (2007/12/24)
Display the date and time (2007/12/24
1:25pm)
Display nothing
IMPORTANT!
• Even if you do not stamp the date and/or time with
Timestamp, you can do so later using the DPOF function
and the printing software function (page 208).
• Once date and time information is stamped in a print, it
cannot be edited or deleted.
• Use the "Date Style" setting (page 194) to specify the Year/
Month/Day format of the date.
• The recording date and time are determined in accordance
with the camera's clock settings (pages 11, 193) when the
snapshot is recorded.
• Digital zoom is not supported while date stamping is turned
on.
Select this
• Date stamping is not supported for the following types of
setting:
images.
Date
– Some BEST SHOT images (Auto Framing, Business
Date&Time
Off
135
cards and documents, White board, etc., Old Photo, ID
Photo)
ADVANCED SETTINGS