Page 1
Digital Camera User’s Guide Thank you for purchasing this CASIO product. • Before using it, be sure to read the precautions contained in this User’s Guide. • Keep the User’s Guide in a safe place for future reference. • For the most up-to-date information about this product, visit the official EXILIM Website at http://www.exilim.com/...
Unpacking As you unpack your camera, check to make sure that all items shown below are included. If anything is missing, contact your original retailer. Rechargeable lithium ion Digital camera Charger unit (BC-81L) battery (NP-80) To attach the strap to the camera Attach strap here.
CASIO COMPUTER CO., LTD. is forbidden under copyright laws. • CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost profits suffered by you or any third party due to the use or malfunction of this product.
General Guide The numbers in parentheses indicate the pages where each item is explained. . Camera Front Back [ SET ] Zoom controller Back lamp [p] (PLAY) button (pages 26, 47, 87, 88) (pages 23, 26, 38) (pages 23, 29) Shutter button (page 25) [0] (Movie) button Control button...
Page 10
Charger Unit Contacts [CHARGE] Lamp AC jack...
Monitor Screen Contents The monitor screen uses various indicators, icons, and values to keep you informed of the camera’s status. • The sample screens in this section are intended to show you the locations of all the indicators and figures that can appear on the monitor screen in various modes. They do not represent screens that actually appear on the camera.
Page 12
. Movie Recording Flash (page 38) 1 2 3 Recording mode (page 50) White balance setting (page 78) Remaining movie memory capacity (page 50) Movie recording time (page 50) Exposure compensation (page 77) Battery level indicator (page 18) . Snapshot Viewing File type Protect indicator (page 96) Folder name/file name (page 131)
Configuring Monitor Screen Settings You can turn display information on and off by pressing [8] (DISP). You can configure separate settings for the REC mode and PLAY mode. Displays information about image settings, etc (REC Information display on mode only). In addition to information about snapshot settings, displays movie setting information and the date/time Information display +...
Quick Start Basics What is a digital camera? A digital camera stores images on a memory card, so you can record and delete images a countless number of times. Record Delete Play You can use the images you record in a variety of different ways. Store images on your Print images.
What you can do with your CASIO camera Your CASIO camera is packed with a powerful selection of features and functions to make recording of digital images easier, including the following three main functions. Premium Auto Select Premium Auto recording and the camera automatically determines whether you are shooting a subject or scenery, and other conditions.
Note that the battery of a newly purchased camera is not charged. Perform the steps under “To charge the battery” to bring the battery to a full charge. • Your camera requires a special CASIO rechargeable lithium ion battery (NP-80) for power. Never try to use any other type of battery.
Other Charging Precautions • Use the special charger (BC-81L if included with camera, BC-80L if purchased separately) to charge the special lithium ion battery (NP-80). Never use any other type of charger device. Attempting to use a different charger can result in unexpected accident.
Page 18
Checking Remaining Battery Power As battery power is consumed, a battery indicator on the monitor screen indicates remaining power as shown below. Remaining Power High Battery Indicator Indicator Color Cyan * Amber indicates battery power is low. Charge the battery as soon as possible. Recording is not possible when is indicated.
Configuring Basic Settings the First Time You Turn On the Camera The first time you load a battery into the camera, a screen appears for configuring the display language, date, and time settings. Failure to set the date and time correctly will cause the wrong date and time data to be recorded with images.
Use [8] and [2] to select “Auto” or “Premium Auto” as the auto recording mode (page 25) and then press [SET]. • After configuring the auto recording mode setting you want here, you can toggle between “Auto” and “Premium Auto” by pressing [AUTO]. If you make a mistake configuring display language, date, or time settings with the above procedure, refer to the following pages for information about how to correct the settings.
• Never insert anything besides a supported memory card (page 20) into the memory card slot. • Should water or any foreign object ever get into the card slot, immediately turn off the camera, remove the battery, and contact your retailer or nearest CASIO authorized service center. Quick Start Basics...
To format (initialize) a new memory card You need to format a new memory card before using it for the first time. Press [ON/OFF] (Power) to turn on the camera and then press [SET]. Use [8] and [2] to select the second Control Panel option from the bottom (MENU) and then press [SET] (page 33).
Turning the Camera On and Off To turn power on [ON/OFF] (Power) To turn on power Press [ON/OFF] (Power) or and enter the [r] (REC). REC mode • The back lamp will light green momentarily and the lens will extend out of the camera (page 26). Back lamp To turn on power Press [p] (PLAY).
Holding the Camera Correctly Your images will not come out clearly if you move the camera when you press the shutter button. When pressing the shutter button, be sure to hold the camera as shown in the illustration below, and keep it still by pressing your arms firmly against your sides as you shoot.
To shoot a snapshot Selecting an Auto Recording Mode You can select one of two auto recording modes (Auto or Premium Auto) according to your digital imaging needs. This is the standard Auto recording mode. Auto • It provides faster operation than Premium Auto recording. With Premium Auto recording, the camera automatically determines whether you are shooting a subject or scenery, and other conditions.
To shoot a snapshot Point the camera at the subject. If you are using Premium Auto, text will appear in the lower right corner of the monitor screen describing the type of shot the camera has detected. • You can zoom the image, if you want. Appears when the camera detects it is stationary on a tripod.
Page 27
Continuing to keep the camera still, press the shutter button the rest of the way down. This records the snapshot. Recording a Movie Full-press ] (Movie) Press [0] (Movie) to start movie recording. Press [0] (Movie) again to stop movie recording. See page 50 for details.
Page 28
. Shooting with Premium Auto • In addition to shutter speed, aperture, and ISO sensitivity, the camera automatically executes the following operation as required when shooting with Premium Auto. – Auto Focus is normally performed until you half-press the shutter button. –...
Viewing Snapshots Use the following procedure to view snapshots on the camera’s monitor screen. • For information about how to play back movies, see page 81. Press [p] (PLAY) to enter the PLAY mode. • This will display one of the snapshots currently stored in memory.
Deleting Snapshots and Movies If memory becomes full, you can delete snapshots and movies you no longer need in order to free up storage and record more images. • In either the REC mode or PLAY mode, you can delete files simply by pressing [ ] (Delete).
To delete all files Press [ ] (Delete). Use [ ] and [2] to select “Delete All Files” and then press [SET]. Use [ ] and [2] to select “Yes” and then press [SET] to delete all files. This will cause the message “There are no files” to appear. Snapshot Shooting Precautions Operation •...
Auto Focus Restrictions • Any of the following can make proper focus impossible. – Solid color wall or other very low contrast subject – Strongly back lit subject – Very shiny subject – Blinds or other subject with a repeating horizontal pattern –...
Snapshot Tutorial Using the Control Panel The Control Panel can be used to configure camera settings. In the REC mode, press [SET]. This will select one of the Control Panel icons and display its settings. Control Panel [8] [2] [4] [6] Available settings [SET] Use [8] and [2] to select the setting you want to change.
NOTE • No icon is displayed for any Control Panel option (page 11) that is set to its initial default (reset) setting. An icon will appear only if you change the setting of the corresponding Control Panel option. The following are the initial defaults for Control Panel options.
Page 35
Image Size Selection Tips Note that larger images have more pixels, so they take up more memory space. More detail, but takes up more memory. Best Large Number when you plan to print large-size prints (such of Pixels as A3 size). Less detail, but takes up less memory.
Page 36
. To select the snapshot image size In the REC mode, press [SET]. Use [8] and [2] to select the top Control Panel option (Snapshot Image Size). Use [ ] and [6] to select an image size and then press [SET]. Suggested Image Size Print Size and...
Page 37
. Specifying Movie Image Quality Movie image quality is a standard that determines the detail, smoothness, and clarity of a movie during playback. Shooting with the high-quality (HD) setting will result in better image quality, but it also shortens the amount of time you can shoot. In the REC mode, press [SET].
Using Flash (Flash) In the REC mode, press [2] ( ) once. Flash Use [4] and [6] to select the flash setting you want and then press [SET]. • If there are no indicators on the monitor screen, you can cycle through the flash modes by pressing [2] ( ).
Page 39
NOTE • Take care so your fingers and the strap do not block the flash. • The desired effect may not be obtained when the subject is too far away or too close. • Flash charging time (page 170) depends on operating conditions (battery condition, ambient temperature, etc.).
Selecting a Focus Mode (Focus) You can select a focus mode setting. In the REC mode, press [SET]. Use [8] and [2] to select the fourth Control Panel option from the top (Focus). Use [4] and [6] to select the setting you want and then press [SET]. Focus Mode Approximate Focus Range Settings...
Page 41
Super Macro Super Macro fixes optical zoom at a position that allows you to shoot from the closest distance to the subject. The result is closer and larger subject images. NOTE • Zoom is fixed while Super Macro is selected, so no zoom operation is performed when you slide the zoom controller.
Page 42
Using Focus Lock Subject to be focused on “Focus lock” is a technique you can use when you want to compose an image in which the subject you want to focus on is not within the focus frame in the center of the screen.
Specifying the Auto Focus Area (AF Area) The camera automatically determines the focus point on the Intelligent screen and focuses there (intelligent AF). Ò • Face detection (page 46) operates automatically. This mode takes readings of a small area in the center of the Spot Û...
Page 44
Press the shutter button the rest of the way down. Spot” or Ë Tracking” “Ò Intelligent” “Û “ Focus frame Focus frame È Multi” “ Focus frame IMPORTANT! • “Ë Tracking” cannot be selected for the Auto Focus area while you are using Auto Shutter (page 69).
Using the Self-timer (Self-timer) With the Self-timer, pressing the shutter button starts a timer. The shutter is released and the image is shot after a fixed amount of time. In the REC mode, press [SET]. Use [8] and [2] to select the sixth Control Panel option from the top (Self-timer).
Using Face Detection (Face Detection) When shooting people, the face detection feature detects the faces of up to ten individuals and adjusts focus and brightness accordingly. In the REC mode, press [SET]. Use [8] and [2] to select the third Control Panel option from the bottom (Face Detection).
Shooting with Zoom Your camera is equipped with various types of zoom: optical zoom, HD Zoom, Single SR Zoom, and digital zoom. The maximum zoom factor depends on the image size setting. Optical zoom Changes the lens focal distance. Allows greater zoom capabilities by cutting out a portion of the HD Zoom original image and enlarging it.
Interpreting the Zoom Bar During a zoom operation, a zoom bar appears on the monitor screen to show the current zoom setting. Undeteriorated resolution range Deteriorated resolution range (optical zoom, HD Zoom, Single SR Zoom) (digital zoom) 16X to 63.8X Optical zoom limit point Zoom pointer (Indicates current zoom.) •...
. Zoom Factor The digital zoom factor depends on the image size (page 34) and on whether Single SR Zoom is enabled or disabled. Maximum zoom factor for undeteriorated resolution Total maximum Image size zoom factor Single SR Zoom: Single SR Zoom: 16:9 4.7X 7.1X...
Recording Movie Images and Audio To record a movie Configure the quality setting for the movie (page 37). The length of the movie you can record will depend on the quality setting you select. In the REC mode, point the camera Remaining recording time at the subject and then press [0] (page 168)
Page 51
NOTE • Spending a long time using movie recording will cause the camera to become slightly warm to the touch. This is normal and does not indicate malfunction. • The camera also records audio. Note the following points when shooting a movie. –...
Using Prerecord Movie With this feature, the camera prerecords up to four seconds of whatever is happening in front of the lens in a buffer that is continually updated. Pressing [0] (Movie) saves the prerecorded action (buffer contents) followed by real-time recording. Real-time recording continues until you stop it.
Shooting a Snapshot while Shooting a Movie While a movie is being recorded, press the shutter button. Movie recording continues after the snapshot is recorded. NOTE • You can use [2] ( ) while shooting a movie to change the flash mode setting. •...
NOTE • You can use [8] (DISP) during audio recording to toggle the monitor screen on and off. • When monitor screen contents are turned off, selecting the “Voice Recording” scene will cause the monitor screen to turn off immediately (page 13). About audio data •...
Using BEST SHOT What is BEST SHOT? BEST SHOT provides you with a collection of sample “scenes” that show a variety of different types of shooting conditions. When you need to change the setup of the camera, simply find the scene that matches what you are trying to achieve, and the camera sets up for it automatically.
Page 56
Press [SET] to configure the camera with the settings for the currently selected scene. This returns to the REC mode. • The settings of the scene you selected remain in effect until you select a different scene. • To select a different BEST SHOT scene, repeat the above procedure from step 1.
Page 57
. BEST SHOT Precautions • Some BEST SHOT scenes cannot be used while recording a movie. • Prerecord Movie scene and For YouTube scene cannot be used while shooting a snapshot. • The Voice Recording scene cannot be used while shooting a snapshot or recording a movie.
Creating Your Own BEST SHOT Setups You can save up to 999 camera setups as user BEST SHOT scenes for instant recall whenever you need them. On the BEST SHOT scene menu, select the scene named BEST SHOT (Register User Scene). Use [4] and [6] to select the snapshot or movie whose setup you want to save.
Shooting ID Photographs You can use this procedure to shoot a portrait and then print it out in the following standard ID photo sizes: 30 24mm, 40 30mm, 45 35mm, 50 40mm, 55 45mm. On the BEST SHOT scene menu, select the “ID Photo” scene. Press the shutter button to shoot a portrait of the person for whom you want to create an ID photo.
Shooting Images of White board, etc. A process called “keystone correction” makes lines straight and natural, even if rectangular subjects are shot from an angle. Before keystone After keystone correction correction On the BEST SHOT scene menu, select the “White board, etc.” scene. Press the shutter button to shoot the image.
Recording a Self-portrait With this feature, you can shoot your own self-portrait simply by pointing the camera at your face. BEST SHOT has two self-portrait scenes from which to choose. • Self-portrait (1 person): Shoots when the face of at least one person, including you, is detected.
Isolating Moving Subjects (Multi-motion Image) Multi-motion Image can be used to isolate a moving subject within a series of multiple images and places them against a stationary background. Make sure that the camera is not moving or shaking when shooting with Multi-motion Image. On the BEST SHOT scene menu, select the “Multi-motion Image”...
Advanced Settings The following are menu operations you can use to configure various camera settings. • REC mode menu contents and operations are different from those in the PLAY mode. This section explains operations using the REC menu screen. See page 90 for information about PLAY menu screen operations.
Page 64
NOTE • [ ] (Delete) provides a helpful way to navigate around tabs and menus. – Pressing [ ] (Delete) while a tab is selected will display the viewfinder screen. – Pressing [ ] (Delete) while menu item or setting is selected will “back step” in the following sequence: Settings Menu items Tab.
REC Mode Settings (REC) Reducing the Effects of Camera and Subject Movement (Anti Shake) Procedure [r] (REC) * [SET] * MENU * REC Tab * Anti Shake You can turn on the camera’s Anti Shake feature to reduce image blur due to subject movement or camera movement when shooting a moving subject using telephoto, when shooting a fast-moving subject, or when shooting under dim lighting conditions.
IMPORTANT! • If there is not enough available capacity on the memory card, you may not be able to record the number of CS images indicated on the monitor screen. Make sure your memory card has sufficient remaining capacity before shooting with continuous shutter.
Changing the Focus Frame Shape (Focus Frame) Procedure [r] (REC) * [SET] * MENU * REC Tab * Focus Frame You can use this procedure to select from among seven different shapes, including a heart shape, for the focus frame. ²...
Using Auto Shutter (Auto Shutter) Procedure [r] (REC) * [SET] * MENU * REC Tab * Auto Shutter With Auto Shutter, the camera releases the shutter automatically when it detects that certain conditions are present. Camera releases the shutter automatically when it detects Detect Blur image blur to camera and subject movement are ¸...
Page 70
. To use Detect Panning to minimize image blur (Detect Panning) Point the camera at location where the subject will pass and then half- press the shutter button to adjust exposure and focus. Press the shutter button the rest of the way down.
Page 71
. To change Auto Shutter trigger sensitivity (Sensitivity) Use [8] and [2] to select “Sensitivity” and then press [6]. Use [4] and [6] to select the sensitivity setting you want, and then press [SET]. • You can select any one of three sensitivity levels, from /.. (Lowest) to /// (Highest).
IMPORTANT! • If the camera remains in Auto Shutter standby without releasing the shutter, you can record an image by pressing the shutter button all the way down again. • Detect Blur and Detect Panning may not produce the desired effect when shooting in an area where dim lighting requires a slow shutter speed, or when the subject is moving extremely quickly.
Configuring Power On Default Settings (Memory) Procedure [r] (REC) * [SET] * MENU * REC Tab * Memory When you turn off the camera, it remembers the current settings of all enabled memory items and restores them when you turn it back on. Any memory item that is disabled will be returned to its initial default setting whenever you turn off the camera.
Image Quality Settings (Quality) Enabling Super Resolution Quality for Snapshots (Single SR Quality) Procedure [r] (REC) * [SET] * MENU * Quality Tab * Single SR Quality Super resolution technology is used to analyze the image, and then interpolation is performed to increase overall image resolution.
Recording Beautiful Images of People and Scenery (Effect) Procedure [r] (REC) * [SET] * MENU * Quality Tab * Effect When either mode described below is selected, the camera will automatically touch up people and scenery to help ensure beautiful images every time. This mode smoothes the skin texture of the subject and softens Make-up facial shadows caused by harsh sunlight for better looking...
Page 76
. Shooting Beautiful Scenery Images (Landscape) Enter the Landscape Mode • Entering the Landscape Mode causes the Ö to appear on the Control Panel. Press [SET]. Landscape icon Use [4] and [6] to select the Landscape Mode setting (third Control Panel option from the bottom), and then press [SET].
Correcting Image Brightness (EV Shift) Procedure [r] (REC) * [SET] * MENU * Quality Tab * EV Shift You can manually adjust an image’s exposure value (EV value) before shooting it. • Exposure Compensation Range: –2.0 EV to +2.0 EV •...
Controlling White Balance (White Balance) Procedure [r] (REC) * [SET] * MENU * Quality Tab * White Balance You can adjust white balance to match the source of light available where you are shooting and avoid the blue cast that results when shooting outdoors when it is cloudy, and the green cast that results when shooting under fluorescent lighting.
Specifying ISO Sensitivity (ISO) Procedure [r] (REC) * [SET] * MENU * Quality Tab * ISO ISO sensitivity is a measure of sensitivity to light. Auto Adjusts sensitivity automatically according to conditions. ISO 50 Lower sensitivity Slow shutter speed Less noise ISO 100 ISO 200 ISO 400...
Optimizing Image Brightness (Lighting) Procedure [r] (REC) * [SET] * MENU * Quality Tab * Lighting You can use this setting to optimize the balance between bright areas and dark areas when shooting images. Performs a higher level of brightness correction than the “On” setting. Extra When this option is selected, it takes longer for the image to be stored after the shutter button is pressed.
Viewing Snapshots and Movies Viewing Snapshots See page 29 for the procedure for viewing snapshots. Viewing a Movie Press [p] (PLAY) and then use [4] and [6] to display the movie you want to view. Press [0] (Movie) to start Movie icon: »...
Editing a Movie on the Camera (Movie Editing) The Movie Editing feature lets you use one of the following procedures to edit out a specific part of a movie. Cuts everything from the beginning of the movie up to the (To-Point Cut) current location.
Page 83
When the frame where you want the cut point to be is displayed, press [2]. While the frame you want the cut to be up to is (To-Point Cut) displayed, press [2]. While the frame you want the first (From) cut to be is displayed, press [2].
Viewing Continuous Shutter Images Each time you perform a continuous shutter (CS) operation, the camera creates a CS group that includes all of the images for that particular CS session. You can use the following procedure to play back the images in a particular CS group. Press [ ] (PLAY) and then use [ ] and [...
Deleting Continuous Shutter Images You can delete CS images (1 image in CS group, selected images in CS group, 1 CS group) while playback is in progress or paused. While CS image playback is in progress or paused, press [ ] or [ ] (Delete).
Page 86
. Dividing Up All CS Groups While a CS group is displayed, press [SET]. Use [8] and [2] to select the bottom PLAY Panel item (MENU) and then press [SET] (page 90). Use [ ] and [ ] to select the “PLAY” tab. Use [ ] and [ ] to select “Divide Group”...
Zooming an On-screen Image In the PLAY mode, use [4] and [6] to scroll through the images until the one you want is displayed. Slide the zoom controller towards z ( ) to Zoom factor zoom. Image area You can use [8], [2], [4], and [6] to scroll the zoomed image on the monitor screen.
Displaying Images in the Calendar Screen In the PLAY mode, slide the zoom controller towards w (]) twice. This will display the calendar screen that shows the first image recorded on each day. To display the first image recorded on a particular day, use [8], [2], [4], and [6] to move the selection boundary to the day you want and then press [SET].
Page 89
Turn on the TV and select its video input mode. If the TV has more than one video input, select the one where the camera is connected. Press [p] (PLAY) to turn on the camera. This will cause an image to appear on the TV screen, without anything appearing on the camera’s monitor screen.
Other Playback Functions (PLAY) This section explains menu items that you can use to configure settings and perform other playback operations. Using the PLAY Panel Pressing [SET] in the PLAY mode will display the PLAY Panel. . Example PLAY Panel Operation In the PLAY mode, press [SET].
Page 91
Displays the PLAY menu. You can perform the following operations on the PLAY menu. Use [4] and [6] to select the tab Tabs where the menu item you want to configure is located. Use [8] and [2] to select the menu item you want, and then press [6].
Playing a Slideshow on the Camera (Slideshow) In the PLAY mode, press [SET]. Use [8] and [2] to select the third PLAY Panel item from the bottom (Slideshow) and then press [SET] (page 90). Start Starts the slideshow. Images Specifies the type of images to be included in the slideshow. All images: Snapshots, movies, and audio recordings Only: Snapshots and audio snapshots only »...
Effect Select the effect you want. Pattern 1 to 5: Plays background music and applies an image change effect. • Patterns 1 through 4 have different background music, but they all use the same image change effect. • Pattern 5 can be used for playback of snapshots only, and the “Interval” setting is ignored.
Page 94
Connect the camera to your computer (pages 116, 125). If you plan to save the music files to the camera’s memory card, make sure the card is loaded in the camera. Perform one of the following operations to open the memory card or built-in memory.
Applying an Artistic Effect (Art Effect) Procedure [p] (PLAY) * Snapshot Screen * [SET] * MENU * PLAY Tab * Art Effect You can transform an image into an artistic image. The transformed image is saved as 3M (2048 1536 pixels) size. Any one of the following art effects can be applied to an image: Oil Painting, Crayon, Water Color.
Protecting a File Against Deletion (Protect) Procedure [p] (PLAY) * [SET] * MENU * PLAY Tab * Protect Protects specific files. Use [4] and [6] to scroll through the files until the one you want to protect is displayed. Use [8] and [2] to select “On” and then press [SET].
Editing the Date and Time of an Image (Date/Time) Procedure [p] (PLAY) * Snapshot Screen * [SET] * MENU * PLAY Tab * Date/Time [8] [2] Changes the setting at the cursor location. [4] [6] Moves the cursor between settings. [0] (Movie) Toggles between 12-hour and 24-hour format.
Resizing a Snapshot (Resize) Procedure [p] (PLAY) * Snapshot Screen * [SET] * MENU * PLAY Tab * Resize You can reduce the size of a snapshot and save the result as a separate snapshot. The original snapshot is also retained. You can select resize an image to one of three image sizes: 10M, 6M, VGA.
Adding Audio to a Snapshot (Dubbing) Procedure [p] (PLAY) * Snapshot Screen * [SET] * MENU * PLAY Tab * Dubbing You can add audio to a snapshot after you shoot it. You can re-record a snapshot’s audio whenever you want.
Voice Recording Playback Controls Fast forward/fast reverse [4] [6] Play/pause [SET] Press [2] and then Volume adjustment press [8] [2]. Display content switching [8] (DISP) Stop playback [0] (Movie) • Audio of an Audio Snapshot also can be played back on a computer with Windows Media Player or QuickTime.
Dynamic Photo You can use the procedures in this section to crop either a moving subject or a still subject out of a snapshot and then insert it into another snapshot or movie. ™ Moving Subject Another Image Dynamic Photo Image To create a subject image to be inserted (Dynamic Photo) In the REC mode, press [SET].
Page 102
Use [8] and [2] to specify the subject type, and then press [4]. Number of CS speed Subject type Shots Moving Subject 20 images per 20 shots Records multiple images 1sec (20fps) second of the subject, which are Moving Subject 10 images per 20 shots cropped and combined to...
Page 103
First, shoot an image that includes the subject you want to extract. • Shoot an image in which the subject is as large as possible. If you selected “2” for the “Number of Shots” setting, the images should include some easily identifiable reference point that you can use for later alignment in step 10 below.
Page 104
IMPORTANT! • When shooting the subject image, shoot against a white wall or some other surface of a color that is different from that of the subject. The camera will not be able to crop the subject image properly if it is the same or similar color as the background. •...
Inserting a Subject into a Snapshot or Movie (Dynamic Photo) Use the following procedure to insert a subject image into a snapshot or movie. In the PLAY mode, press [SET]. Use [8] and [2] to select the second PLAY Panel item from the bottom (Dynamic Photo) and then press [SET] (page 90).
Page 106
NOTE • The camera comes with a number of extracted sample subjects in its built-in memory, which you can use to create Dynamic Photos, if you like. • Performing a delete or format operation will not delete the extracted sample subjects in built-in camera memory.
Converting a Dynamic Photo Still Image to a Movie (Movie Converter) A Dynamic Photo with a still image background and a moving subject is stored as a series of 20 still images. You can use the following procedure to convert the 20 images that make up a Dynamic Photo to a movie.
Printing Printing Snapshots Professional Print Service You can take a memory card that contains the images you want to print to a professional print service and have them printed. Printing on a Home Printer Printing Images on a Printer with Memory Card Slot You can use a printer equipped with a memory card slot to print images directly from a memory card.
Connecting Directly to a PictBridge Compatible Printer You can connect the camera directly to a printer that supports PictBridge and print images without going through a computer. . To set up the camera before connecting to a printer Turn on the camera. Next, press [SET] and then display the REC menu (page 63) or the PLAY menu (page 90).
Page 110
. To print Turn on the printer and load paper. Turn on the camera. This will display the print menu screen. Use [8] and [2] to select “Paper Size”, and then press [6]. Use [8] and [2] to select a paper size and then press [SET].
Using DPOF to Specify Images to be Printed and the Number of Copies . Digital Print Order Format (DPOF) DPOF is a standard that allows you to include image type, number of copy, and time stamp on/off information on the memory card with the images. After configuring settings, you can use the memory card to print on a home printer that supports DPOF or take the memory card to a professional print service.
Page 112
. Configuring the Same DPOF Settings for All the Images Procedure [p] (PLAY) * Snapshot Screen * [SET] * MENU * PLAY Tab * DPOF Printing * All images Use [8] and [2] to specify the number of copies. You can specify a value up to 99. Specify 00 if you do not want to print the image. •...
Page 113
. Date Stamping You can use one of the following three methods to include the recording date in the printout of an image. Configuring camera settings Configure DPOF settings (page 111). You can turn date stamping on and off each time you print. You can configure settings so some images include the date stamp and some don’t.
Using the Camera with a Computer Things you can do using a computer... You can perform the operations described below while the camera is connected to a computer. Save images to a • Save images and view them manually computer and (USB connection) (pages 116, 125).
Vista / Windows XP View the User’s Guide (Not required if already (SP2/SP3) / Windows installed.) 2000 (SP4) YouTube Uploader for CASIO, Photo Transport, and Dynamic Photo Manager will not run under 64-bit versions of Windows OS. Using the Camera with a Computer...
. Computer System Requirements for Bundled Software Computer system requirements are different for each of the applications. See the “Read me” file that comes with each application for details. Information about computer system requirements also can be found under “Computer System Requirements for Bundled Software (Bundled CD-ROM)”...
Page 117
Turn off the camera and USB port USB cable then use the USB cable that comes with the camera to connect it to Large connector your computer. • The camera does not draw power over the USB cable. Make sure the camera’s battery is USB/AV port sufficiently charged...
Page 118
Right-click the “DCIM” folder. On the shortcut menu that appears, click “Copy”. Windows 7 / Windows Vista users: Click “Start” and then “Documents”. Windows XP users: Click “Start” and then “My Documents”. Windows 2000 users: Doubleclick “My Documents” to open it. •...
Double-click the image file you want to view. • For information about file names, see “Memory Folder Structure” on page 132. • An image that was rotated on the camera will be displayed on your computer screen in its original (unrotated) orientation. Never use your computer to modify, delete, move, or rename any image files that are in the camera’s built-in memory or on its memory card.
Uploading Movie Files to YouTube Installing YouTube Uploader for CASIO from the CD-ROM that comes with your camera simplifies uploading of movie files you recorded with the “For YouTube” BEST SHOT scene to YouTube.
Page 121
. To upload a movie file to YouTube • Before you can use YouTube Uploader for CASIO, you need to go to the YouTube website (http://www.youtube.com/) and register as a user there. • Do not upload any video that is copyrighted (including neighboring copyrights) unless you yourself own the copyright or you have obtained the permission of the applicable copyright holder(s).
. To transfer images to the camera Connect the camera to your computer (page 116). On your computer, click the following: Start * All Programs * CASIO * Photo Transport. This starts up Photo Transport. Drag the file(s) you want to transfer to the [Transfer] button.
Page 123
. To transfer computer screen captures to the camera Connect the camera to your computer (page 116). On your computer, click the following: Start * All Programs * CASIO * Photo Transport. This starts up Photo Transport. Display the screen whose screen capture you want to transfer.
Play back Dynamic Photo images on your EXILIM, a computer, or on a mobile phone You can copy moving subjects (animated characters) from your computer to the EXILIM. You also can convert Dynamic Photo images to movies and send them to a mobile phone for playback.
Using the Camera with a Macintosh Install the required software in accordance with what version of the Macintosh OS you are running and what you want to do. Operating When you want to System Install this software: do this: page: Version Save images to your OS 9...
Page 126
Turn off the camera and USB port USB cable then use the USB cable that comes with the camera to connect it to Large connector your Macintosh. • The camera does not draw power over the USB cable. Make sure the camera’s battery is USB/AV port sufficiently charged...
Page 127
After the copy operation is complete, drag the drive icon to Trash. On the camera, press [ON/OFF] (Power) to turn off the camera. After making sure that the green back lamp is unlit, disconnect the camera from the computer. . To view copied images Double-click the camera’s drive icon.
Transferring Images Automatically and Managing Them on Your Macintosh If you are running Mac OS X, you can manage snapshots using iPhoto, which comes bundled with some Macintosh products. If you are running Mac OS 9, you will need to use commercially available software.
Open the file named “camera_xx.pdf”. • “xx” is the language code (Example: camera_e.pdf is for English.). User Registration Internet registration only is supported. Visit the following CASIO website to register: http://world.casio.com/qv/register/ Using an Eye-Fi Wireless SD Memory Card to Transfer Images...
Page 130
IMPORTANT! • Recorded images are transferred over wireless LAN. Do not use the Eye-Fi card or turn off Eye-Fi card communication (page 134) when on an aircraft or in any other location where use of wireless communication is limited or prohibited. •...
Files and Folders The camera creates a file and saves it each time you shoot a snapshot, record a movie, or perform any other operation that stores data. Files are grouped by storing them in folders. Each file and folder has its own unique name. •...
File System (DCF). . About DCF The following operations are supported for DCF-compliant images. Note, however, that CASIO makes no performance guarantees concerning these operations. • Transferring this camera’s DCF-compliant images to another manufacturer’s camera and view them. • Printing this camera’s DCF-compliant images on another manufacturer’s printer.
Page 133
. Supported Image Files • Image files shot with this camera • DCF-compliant image files This camera may not be able to display an image, even if it is DCF-compliant. When displaying an image recorded on another camera, it may take a long time for the image to appear on this camera’s monitor screen.
Other Settings (Set Up) This section explains menu items that you can use to configure settings and perform other operations in both the REC mode and PLAY mode. See the following for more information. – REC Menu (page 63) – PLAY Menu (page 90) Changing the Menu Screen Color (Menu Color) Procedure [SET] * MENU * Set Up Tab * Menu Color...
Configuring Camera Sound Settings (Sounds) Procedure [SET] * MENU * Set Up Tab * Sounds Startup Specifies the startup sound. Half Shutter Sound 1 - 5: Built-in sounds (1 through 5) Shutter Off: Sound off Operation Specifies the sound volume. This setting is also used as the Operation audio level during video output (page 88).
Specifying the File Name Serial Number Generation Rule (File No.) Procedure [SET] * MENU * Set Up Tab * File No. Use the following procedure to specify the rule that governs generation of the serial number used in file names (page 131). Tells the camera to remember the last used file number.
Page 137
Configuring World Time Settings (World Time) Procedure [SET] * MENU * Set Up Tab * World Time You can use the World Time screen to view the current time in a zone that is different from your Home City when you go on a trip, etc. World Time displays the current time in 162 cities in 32 time zones around the globe.
Page 138
Time Stamping Snapshots (Timestamp) Procedure [SET] * MENU * Set Up Tab * Timestamp You can configure the camera to stamp the recording date only, or date and time in the lower right corner of each snapshot. • Once date and time information is stamped into a snapshot, it cannot be edited or deleted.
Specifying the Date Style (Date Style) Procedure [SET] * MENU * Set Up Tab * Date Style You can select from among three different styles for the date. Example: July, 10, 2012 YY/MM/DD 12/7/10 DD/MM/YY 10/7/12 MM/DD/YY 7/10/12 Specifying the Display Language (Language) Procedure [SET] * MENU * Set Up Tab * Language .
Configuring Sleep State Settings (Sleep) Procedure [SET] * MENU * Set Up Tab * Sleep This feature turns off the monitor screen whenever no camera operation is performed for a preset amount of time. Press any button to turn the monitor screen back on. Trigger Time Settings: 30 sec, 1 min, 2 min, Off (Sleep is disabled while “Off”...
Configuring Auto Power Settings (Auto Power Off) Procedure [SET] * MENU * Set Up Tab * Auto Power Off Auto Power Off turns off the camera whenever no camera operation is performed for a preset amount of time. Trigger Time Settings: 1 min, 2 min, 5 min (The trigger time is always 5 minutes in the PLAY mode.) •...
Disabling File Deletion (Ü Disabled) Procedure [SET] * MENU * Set Up Tab * Ü Disabled The camera will not start the image delete operation when you press [ ] (Delete) while “Ü Disabled” is turned on. You can protect against accidental deletion of images by selecting “On” for “Ü Disabled”.
Selecting the Screen Aspect Ratio and Video Output System (Video Out) Procedure [SET] * MENU * Set Up Tab * Video Out You can use the procedure in this section to select either NTSC or PAL as the video output system. You can also specify an aspect ratio of 4:3 or 16:9. NTSC Video system used in Japan, the U.S., and other countries Video system used in Europe and other areas...
Formatting Built-in Memory or a Memory Card (Format) Procedure [SET] * MENU * Set Up Tab * Format If a memory card is loaded in the camera, this operation will format the memory card. It will format built-in memory if no memory card is loaded. •...
Appendix Precautions during Use . Avoid Use While In Motion • Never use the camera to record or play back images while operating an automobile or other vehicle, or while walking. Looking at the monitor while in motion creates the risk of serious accident. .
Page 146
• Never try to take the camera apart or modify it in any way. Doing so creates the risk of electric shock, burn injury, and other personal injury. Be sure to leave all internal inspection, maintenance, and repair up to your dealer or nearest CASIO authorized service center.
Page 147
• The battery is intended for use with a CASIO Digital Camera only. Use with any other device creates the risk of the battery damage, or deterioration of battery performance and service life.
Page 148
• If battery charging does not end normally within the specified charging time, stop charging anyway and contact your local CASIO authorized service center. Continued charging creates the risk of battery overheating, fire, and explosion.
Page 149
. Data Error Precautions Your digital camera is manufactured using precision digital components. Any of the following creates the risk of corruption of data in camera memory. – Removing the battery or memory card while the camera is performing some operation –...
Page 150
Doing so creates the risk of fire, malfunction, and electric shock. 0 Should the power cord ever become damaged (to the point that internal wires are exposed or cut), immediately contact your original retailer or a CASIO authorized service center to request repair. Continued use of a damaged power cord creates the risk of fire, malfunction, and electric shock.
Page 151
Note that CASIO COMPUTER CO., LTD. shall not be held liable for use of this product in any way that infringes on the copyrights of others or that violates copyright laws.
• Check if the charger and battery contacts are dirty. If contacts are dirty, wipe them clean with a dry cloth. If problems continue to occur after you perform the above steps, it could mean that the battery is faulty. Contact your nearest CASIO authorized service center. Appendix...
To replace the battery Open the battery cover and remove the current battery. With the monitor screen side of the camera facing upwards, slide the stopper in the direction indicated by the arrow in the illustration. After the battery pops out, pull it the rest of the way out of the Stopper camera.
Using the Camera in another Country . Precautions during Use • The bundled charger is designed for operation with any power supply in the range of 100V to 240V AC, 50/60Hz. Note, however, that the shape of the power cord plug depends on each country or geographic area.
Page 155
. Using a Memory Card • SD memory cards and SDHC memory cards have a Write enabled write protect switch. Use the switch when you need to guard against accidentally deleting data. Note, however, if you write protect an SD memory card you Write disabled must then turn write protection off whenever you want to record to it, format it, or delete any of its images.
Hard Disk Drive Space : At least 335MB Other : Internet Explorer 6.0 or higher installed For details about the minimum system requirements for each software application, see the “Read me” files on the CASIO Digital Camera Software CD-ROM that comes bundled with the camera. Appendix...
Reset Initial Default Settings The tables in this section show the initial default settings on menus that appear in the REC mode and PLAY mode when you reset the camera (page 144). • A dash (–) indicates an item whose setting is not reset or an item for which there is no reset setting.
Page 158
“Set Up” Tab Menu Color Type 1 Adjust – Eye-Fi Date Style – Startup: Sound 1 / Language – Half Shutter: Sleep 1 min Sound 1 / Auto Power Shutter: Sound 1 / 2 min Sounds Operation: Sound 1 / = Operation: REC/PLAY Power On...
2)The battery may be dead. Charge the battery (page 16). If the battery goes dead soon after being charged, it means the battery has reached the end of its life and needs to be replaced. Purchase a separately available CASIO NP-80 rechargeable lithium ion battery. The camera 1)Auto Power Off may have activated (page 141).
Page 160
(page 38) or select a different BEST SHOT scene (page 55). The ? (Flash Off) The flash unit may be malfunctioning. Contact a CASIO icon flashes red on authorized service center or your original retailer. Note that...
Page 161
Problem Possible Cause and Recommended Action A recorded image 1)Camera power may have been turned off before the save was not saved. operation was complete, which will result in the image not being saved. If the battery indicator shows , charge the battery as soon as possible (page 18).
Page 162
Problem Possible Cause and Recommended Action When shooting Auto Shutter may not trigger when shooting under very bright or with Auto Shutter, very dark conditions, or when shooting a fast moving subject, the shutter does etc. If this happens, try changing the Auto Shutter Trigger not trigger.
Page 163
If the language selection screen does not re-appear when you turn the camera on, it means that the camera’s memory management data has been restored. If the same message appears after you turn power back on, contact your retailer or a CASIO authorized service center. Appendix...
24 hours, it could mean that the camera’s setting camera’s battery. memory is defective. Contact your retailer or a CASIO authorized service center. Buttons are not With large capacity memory cards there is a delay after the...
Page 165
If the same LENS ERROR message appears after you turn power back on, contact a CASIO authorized service center or your original retailer. The Camera Shake unit may be malfunctioning. If the same LENS ERROR 2 message appears after you turn power back on, contact your retailer or a CASIO authorized service center.
Page 166
Remove the obstruction and turn power back on again. Your camera system is corrupted. Contact your retailer or a SYSTEM ERROR CASIO authorized service center. The LOCK switch of the SD or SDHC LOCK memory card loaded in the camera is in the The card is locked.
Specifications File Format Snapshots: JPEG (Exif Version 2.3); DCF 2.0 standard; DPOF compliant Movies: Motion JPEG AVI, IMA-ADPCM audio (monaural) Audio (Voice Recording): WAV (monaural) Recording Media Built-in Memory (Image Storage Area: 14.5MB SD/SDHC * Built-in memory capacity after formatting Recorded Image Sizes Snapshot: 14M (4320...
Page 170
Exposure –2.0 EV to +2.0 EV (in 1/3EV steps) Compensation Shutter CCD shutter, mechanical shutter Shutter Speed Snapshot (Auto): 1/2 to 1/2000 second Snapshot (Night Scene): 4 to 1/2000 second * May differ due to the camera setup. Aperture Value F3.2 (W) to F8.0 (W) (When used with ND filter) * Using optical zoom changes the aperture value.
Page 171
External connection USB port (Hi-Speed USB compatible:Mass Storage / Full- terminal Speed USB compatible:PTP) / AV output terminal (NTSC/PAL) Microphone Monaural Speaker Monaural Power Requirements Rechargeable lithium ion battery (NP-80) Approximate Battery Life All of the values provided below represent the approximate amount of time under normal temperature (23°C (73°F)) before the camera turns off.
Page 172
. Rechargeable lithium ion battery (NP-80) Rated Voltage 3.7 V Rated Capacitance 700 mAh Operating Temperature 0 to 40°C (32 to 104°F) Requirements Dimensions 31.4 (W) 39.5 (H) 5.9 (D) mm (1.24" (W) 1.56" (H) 0.23" (D)) Weight Approximately 19 g (0.67 oz) .
Page 173
CASIO COMPUTER CO.,LTD. 6-2, Hon-machi 1-chome Shibuya-ku, Tokyo 151-8543, Japan MA1010-C...
Page 174
Getting the Most Out of Dynamic Photo For a wealth of information about Dynamic Photo including explanations about how to use Dynamic Photo images, the Dynamic Studio image conversion service, sample images, and more, visit the special Dynamic Photo website at: http://dp.exilim.com/ This manual provides an introduction to Dynamic Photo, which creates a whole new way to enjoy digital imaging.
Dynamic Photo! A totally new way to enjoy digital photography! Dynamic Photo makes it easy to crop a moving subject out of a series of images and insert it into other images! A simple operation on the camera extracts a moving subject automatically by cropping up to 20 Continuous Shutter images.
Using the Dynamic Photo Extracted Sample Subjects Your digital camera comes with a number of extracted sample subjects in its built-in memory. You can use these sample subjects to practice creating Dynamic Photo images by inserting them into your original snapshots or movies. Step 1: Shoot the image into which you want to insert an extracted sample subject.
Page 177
After creation of the Dynamic Photo image is complete, the finished image with the inserted moving subject will appear on the monitor screen. After you master the above procedure using extracted sample subjects, you will be ready to create your own extracted subjects and insert them into snapshots or movies for totally original Dynamic Photo images.
Creating a Dynamic Photo Image Step 1: Shoot the subject. Dynamic Photo images are created by extracting the subject out of one image, and inserting it into another image (snapshot or movie). The term “subject” as used here refers to what you extract or crop out of the first image. Perform the following steps to shoot and extract the subject.
Page 179
First, shoot the subject. Best results can be obtained with the camera secured on a tripod. With the camera pointed at the moving subject, press the shutter button to record. If you selected “Moving Subject”, the camera will record a series of Continuous Shutter (CS) images over a few seconds.
Complete! The camera compares the images you shot in steps 4 and 5 and extracts the subject. The extracted subject image will appear on the monitor screen. If you selected “Moving Subject”, the 20 subject images that were recorded will scroll on the screen, creating the illusion of movement.
Page 181
Use [4] and [6] to select the subject you want to insert and then press [SET]. * Only subjects that can be inserted into other images will appear at this time. If you are inserting a subject into a movie an image will appear on the monitor screen showing the approximate location of the subject in the movie.
Four Tips for Good Subject Cropping • When shooting the subject image, shoot against a white wall or some other surface whose color is different from that of the subject. The camera will not be able to crop the subject image properly if its color is the same as or similar to the background color.
Move the subject away from the wall to avoid shadows! The camera may mistake shadows on the wall or floor caused by strong sunlight, illumination, or other light sources as part of the subject. Shadows tend to form when the subject is too close to a wall.
Number of CS speed Subject type images Moving Subject 20 frames per Creates a moving subject from the 20 images 1sec (20fps) second CS images. • The subject is cropped out of Moving Subject 10 frames per 20 images each of the CS images. 2sec (10fps) second •...
Extracting Text from an Image You can write text on a blank sheet of paper, shoot an image of it, and then use the following procedure to extract the text for insertion into an image. Before shooting the subject in step 4 under “Step 1: Shoot the subject.”...
Step 4: Converting a Dynamic Photo Still Image to a Movie (Movie Converter). A Dynamic Photo with a still image background and a moving subject is stored as a series of 20 still images. You can use the following procedure to convert the 20 images that make up a Dynamic Photo to a movie.
This makes it possible to view Dynamic Photo images you created with a CASIO EXILIM digital camera to a format that can be played back as a movie on a PC, digital photo frame, cell phone or other device.