Editing The Date And Time Of An Image - Casio Exilim EX-Z8 User Manual

Editing the Date and Time of an Image

Use the procedure in this section to change the date and time of
a previously recorded image.
1.
In the PLAY mode, use [ ] and [ ] to display
the image whose date and time you want to
edit.
2.
Press [MENU].
3.
On the "PLAY" tab, select "Date/Time" and
then press [ ].
4.
Set the date and the time you want.
To do this:
Change the value at the cursor
location
Move the cursor between settings
Toggle between 12-hour and 24-
hour timekeeping
5.
Do this:
Press [ ] or [ ].
Press [ ] or [ ].
Press [BS].
164
When all the settings are the way you want,
press [SET] to apply them.
• After editing the time and date, display the image to
confirm that the date and time are correct.
IMPORTANT!
• The date and time stamped into an image using the Time
Stamp feature cannot be edited (page 135).
• You cannot edit the date and time of an image that is
protected. Unprotect the image and then edit the date and
time.
• You can specify any date in the range of January 1, 1980 to
December 31, 2049.
EDITING IMAGES