ICHRoboter iCleaner-120/SPC1 User Manual page 9

4.3 Proper Shut Down and Care
4
6
(2) Clean iCleaner-120: Invert the iCleaner-120 gently onto the floor, unlock the
Latch on the Base Plate (Pic4.3.2) and remove the Filter Bag from Base Plate,
clean the Filter Bag (Pic.4.3.3), once clean place the Filter Bag on its frame,
reassemble the Base Plate and put it back into the iCleaner-120 once the Filter
Bag is dry.
(Note: When re-fitting the Filter Bag to the Base Plate, please ensure the long
sides of the Filter Bag are smooth to ensure an easy fit into the base of the
iCleaner-120.)
OPEN
All manuals and user guides at all-guides.com
OPEN
(1) To Shut Down The iCleaner-120:
Turn the power switch on the power
Box to the off position, once the
iCleaner-120 finishes working, pull the
Floating Cable slowly until the Handle
emerges from the water (Pic.4.3.1), and
then pull the iCleaner-120 out of the
pool by its Handle.