Canon EOS R10 User Manual page 502

4.
Take the picture.
Focus on the subject, then press the shutter button completely.
To check operation, look at the self-timer lamp, listen for beeps, or
watch the countdown in seconds on the screen.
Self-timer lamp blinking accelerates and the camera beeps quickly
approx. 2 sec. before the picture is taken.
Caution
With [ ], some conditions in continuous shooting may lengthen the shooting
interval, such as image quality and use of flash.
Note
[ ] is used to start shooting without touching the camera (to avoid camera shake)
when it is mounted on a tripod for shots such as still lifes or long exposures, for
example.
After taking self-timer shots, playing back the image (
exposure is recommended.
When using the self-timer to shoot yourself, use focus lock (
same distance as where you will stand.
To cancel the self-timer after it starts, either tap the screen or press the <
button.
Auto power off time may be extended when the camera is set for remote control
shooting.
) to check focus and
502
) on an object at the
>