Canon EOS R10 User Manual page 286

Caution
Use cards with 4 GB or more of free space.
Images may not be captured correctly if the battery runs out during image
processing while you are shooting in RAW burst mode with a slow-writing card and
low battery.
Display pauses when you press the shutter button halfway.
Camera shake or subject motion may cause image distortion.
ISO Auto is used when shooting in <
Shutter speeds slower than 1/30 sec. are not available in <
< > mode.
The camera shoots with approx. 24 megapixels (6000×4000).
Images are captured using the electronic shutter. Maximum shutter speed is
1/4000 sec. Before shooting, consider checking the [Electronic] precautions (
To view images in rolls on a computer, either extract them or use the EOS
application Digital Photo Professional.
Set [ : RAW burst mode] to [Disable] if you will connect the camera to a
computer and use the EOS application EOS Utility. Setting it to [Enable] will
prevent the camera from communicating with the computer.
Maximum burst may be lower under low light.
In RAW burst mode, the aperture value will change if you zoom while pressing the
shutter button halfway or completely with zoom lenses that have variable maximum
aperture. To maintain the same exposure in <
ISO Auto.
In RAW burst mode, even with zoom lenses that do not have variable maximum
aperture, exposure may change if you zoom while pressing the shutter button
halfway or completely. For details, refer to the Canon website (
There may be a delay before subsequent shooting in RAW burst mode is possible,
depending on shooting conditions, the type of memory card, and the number of
shots taken continuously. Writing will finish faster on cards with a fast write speed.
Note
RAW images captured are saved in a single file (roll). These files have a .CR3 file
extension.
Picture Style, white balance, and Auto Lighting Optimizer settings configured for
the first shot also apply to the next shots.
The camera does not beep as you are shooting.
[ : RAW burst mode] reverts to [Disable] when the power switch is set to
< >.
>, < >, or <
> mode, consider shooting with
286
> mode.
>, < >, or
).
).