Canon EOS R10 User Manual page 50

3.
Remove the card.
Gently push in the card, then let it go to eject.
Pull the card straight out, then close the cover.
Caution
Do not remove cards immediately after a red [
are shooting. Cards may be hot, due to high internal camera temperature. Set the
power switch to <
Removing hot cards immediately after shooting may cause you to drop and damage
them. Be careful when removing cards.
Note
The number of shots available varies depending on remaining card capacity and
settings such as image quality and ISO speed.
Setting [ : Release shutter without card] to [Disable] will prevent you from
forgetting to insert a card (
> and stop shooting for a while before removing cards.
).
50
] icon is displayed as you