Using The Speech Screen - Interacoustics Affinity2.0 Instructions For Use Manual

3.2

Using the speech screen

The f ollowing section describes the elements of the speech screen in addition to the tone screen:
D-0004578-R – 2022/05
Affinity2.0/Equinox2.0 - Instructions for Use - US
Input levels sliders allow f or adjusting the input level to 0 VU f or the
selected input. This ensures that correct calibration is obtained f or Mic1,
Mic2, AUX1, and AUX2.
WR1, WR2 and WR3 (Word Recognition) allows selecting dif f erent speech
list setups as def ined by the selected protocol. The labels of these lists
which go along with these buttons can also be customized in the protocol
setup.
Selecting HL, MCL and UCLsets the symbol types that are currently in use
by the audiogram. HL stands f or hearing level, MCL stands f or most
comf ortable level and UCL stands f or uncomf ortable level.
Each type of measurement is saved as a separate curve.
Binaural and Aided f unction allows f or indicating if the test is perf ormed
binaurally or while the patient is wearing hearing aids.
Page 26