Page 14
Trademarks EVOC is a registered trademark of EVOC Intelligent Technology Co., Ltd. Other product names mentioned herein are used for identification purposes only and may be trademark and/or registered trademarks of their respective companies. Please visit our website: http://www.evoc.com for more information, Or send to the Technical Support Mailbox support@evoc.com ...
Page 15
Safety Instructions 1. Please read this manual carefully before using the product; 2. Before inserting, removing or reconfiguring motherboards or expansion cards, first disconnect the computer and peripherals from their power sources to prevent electric shock to human bodies or damage to the product; 3. Before moving the product, please unplug the AC cable from the power socket; 4. When inserting or removing boards, please firstly unplug the AC power cable; 5. Before connecting or disconnecting any signal cable, make sure all power cables are unplugged in advance; 6. After turning off the computer, wait at least 30 seconds before turning it back on; ...
Page 16
Contents Chapter 1 Product Introduction ................1 Overview ........................ 1 Main Function......................1 Main Performance....................3 Mounting Mode ...................... 4 Requirements of Transportation and Storage ............4 Chapter 2 Installation ....................5 Product Outline ....................... 5 Product Appearance and Installation Dimensions............5 External Connectors ....................6 Overall Assembly Drawing..................7 Install the Hard Disk....................8 Special Function Instruction ..................9 Chapter 3 Install the Drivers .................. 10...
Chapter 1 Product Introduction Chapter 1 Product Introduction Overview MEC7003 is an embedded minitype PC. The chassis adopts sheet metal structure, which is small in appearance and compact in structure. It has fully taken the heat dissipation and PC wiring into consideration as well as the issues related to upgrade. As for the structure, it provides excellent airtight, dustproof, heat dissipation and antivibration performance. The product provides strong environment adaptability and ...
Page 18
Chapter 1 Product Introduction Display Function Ø The PC supports one VGA connector, one HDMI connector, one DVI connector and one Display port externally; Ø Adopts Intel® Sandy bridge CPU internally integrated graphics controller display chip, supporting Direct X10.1; Ø Supports VGA+Display port, VGA+HDMI and VGA+DVI display and hotswap function, all of which are synchronous output; Ø VGA supports 2048x1536@75HZ, 32Bit color depth in maximum; Display port supports 2560x1200@60HZ in maximum; DVI and HDMI support 1920x1200@60HZ in maximum. ...
Chapter 1 Product Introduction Input Voltage/Frequency: 100 ~ 240V AC 50Hz/60Hz; Total Power Consumption: 120W (Max); Output Voltage/Current: +12V@10A(Max), +5%/5%. Expansion Bus Supports one Mini PCIE card, complying with PCIE 2.0 standard; Power Consumption of the PC Ø Power Consumption: 48.9 W (Standby) Ø Power Consumption: 64.9 W (100% operate 3D) Main Performance Mechanical Dimensions, Weight and Environment Ø Dimensions: 270mm (L) x 201.2mm (W) x 60mm (H); Ø Net Weight: 2.6Kg; Ø Operating Environment: ...
Chapter 1 Product Introduction Reliability l MTBF≥50000h; l MTTR≤0.5h. Safety Meets the basic requirements of GB4943. Mechanical and Environment Adaptability l Antivibration: 519Hz/1.0mm amplitude; 19200Hz/1.0g acceleration; l Antishock: 15g acceleration, 11ms duration; l Noise: ≤50dB. Mounting Mode □19″ Rack Mount ■Desktop □Embedded Panel □Wall Mount □VESA Standard Supporting Arm □Portable □Others___________ Requirements of Transportation and Storage l Transportation ...
Chapter 2 Installation Overall Assembly Drawing 1 1. Enclosure 2. Enclosure Baffle 3. Switch 4. Dustproof Net Bracket 5. LED Board 6. Motherboard Module 7. Cover 8. HDD Module 9. System Fan 10. USB Patch Cable Assembly Instructions 1、 Assemble the motherboard module with the corresponding rivets in chassis and tighten the screws; 2、 After assembling the HDD module, tighten the relevant screws; 3、 Assemble the system fan, USB patch cable, LED board, switch and dustproof net bracket accordingly and then tighten the relevant screws or nuts; 4、 Insert the Mini PCIE card into the corresponding slot from the bottom of the chassis, put on the baffle and then tighten with 1PCS screws; ...
Chapter 2 Installation Install the Hard Disk 1、 Assemble the HDD with the HDD bracket according to the figure and tighten the screws as the HDD module; 2、 Assemble the HDD module with the rivets in chassis according to the figure, tighten the screws and plug in the relevant cables. 8 MEC7003 ...
Chapter 2 Installation Special Function Instruction Lay the chassis upside down. Unscrew the screws of the baffle at the bottom of the chassis via screwdriver, take off the baffle, insert the Mini PCIE card and then tighten the baffle. MEC7003 9 ...
Chapter 3 Install the Drivers Chapter 3 Install the Drivers Regarding the installation of the driver program and the detailed information of the motherboard, please refer to the CD that accompanies the PC. 10 MEC7003 ...
Need help?
Do you have a question about the MEC 7003 and is the answer not in the manual?
Questions and answers