Storage - Intex PureSpa Greywood Deluxe SB-HWF10 Owner's Manual

MAINTENANCE (continued)
Spa Cover
The attachment buckles of the cover are locking buckles. Two keys are provided in the plastic bag with
the manual and other accessories. Each buckle is marked with "locked" and "unlocked" symbols for easy
operation: put the key into the slot on the buckle and turn it to the appropriate position to lock or unlock the
buckle respectively.
To assure safety from unauthorized access, always put the cover on when spa is not in use and lock all
buckles. Always keep the keys out of reach of children. In case you misplace the keys, you can use any
similar size fl at screwdriver to lock or unlock the buckles.
Inspect the spa cover regularly for leaks, premature wear and tear, damage, or signs of deterioration. Never
use a worn or damaged cover: it will not provide the level of protection required to prevent unsupervised
access to the spa by a child.
Spa Tub and Cover Air Bladder Repair
Use the enclosed repair patch to repair any puncture:
• Clean and dry the area to be repaired thoroughly.
• Remove the patch backing paper and press patch fi rmly over the puncture. Smooth out the surface to
remove any air bubbles under the patch.
In regions subject to freezing temperatures, drain, clean, disassemble and properly store the spa set and
related components indoors when the temperature drops below 39°F (4°C).
1. Drain and clean the spa following the "Spa Tub Drainage" and "Spa Tub Cleaning" sections.
2. Reverse set up instructions to defl ate and disassemble the spa tub, spa control unit and spa cover air
bladder.
3. To defl ate the tub and the cover air bladder:
a) Open the defl ation outlet cap (27) with the included bolt
wrench (6) (see drawing 19).
b) Insert defl ation hose adaptor (28) into the defl ation outlet.
c) Insert infl ation hose (7) over the defl ation hose adaptor (28).
d) Insert the other end of the infl ation hose into the tub air
valve or cover air bladder valve.
e) Press the air bubble
f) When defl ation is completed reverse above steps and
ensures the defl ation outlet cap (27) is securely fastened.
Caution: Only use for the purpose described in this manual.
Keep the infl ation hose away from water or small objects when
the defl ation function is activated to avoid damage to the blower
motor.
4. Make sure all the spa components and accessories are
thoroughly clean and dry before storage. Air-dry the spa tub in
the sun for an hour before folding.
5. Fold the spa tub loosely and avoid any sharp corners to prevent
damage or leakage to the spa tub liner.
6. Prepare additional new cartridges for next time use.
7. Store the spa tub and accessories indoors, in a dry, temperature controlled, between 0º – 40ºC
(32º – 104ºF), storage location.
8. The original packing can be used for storage.
S AVE THESE INSTRUCTIONS
(352PO) SPA ENGLISH 7.5" X 10.3" PANTONE 295U 12/16/2021

STORAGE

button to defl ate.
352
English
PO
19
1
27
6
2
28
3
7
Page 24