Advertisement
Advertisement
Table of Contents
Related Manuals for ML Accessories OPRCDKIT
Summary of Contents for ML Accessories OPRCDKIT
- Page 2 These instructions should be read carefully and retained after installation by the end user for future reference and maintenance. These instructions should be used to aid installation of the following product: OPRCDKIT SAFETY • This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671) and current Building Regulations.
- Page 3 INSTALLATION • Choose a suitable position for the outdoor socket outlet. It should be fixed to a rigid flat surface as unevenness could cause damage to the product or affect operation • Choose a suitable location close to the socket outlet to bring the supply cable through the wall to inside the building •...
- Page 4 • The backbox has drain hole drilling guides marked (see Fig. 2). Drilling a drain hole is advised if the unit is installed in a location subject to temperature fluctuations where build-up of condensation may occur. It is not advised if the unit will be subject to spray or jets, as drilling a drain hole will reduce the IP rating.
- Page 5 Secure the baseplate to the surface. The fixing holes are slotted to allow some rotational adjustment • Replace the gasket onto the backbox, then wire as shown in Fig. 3 ensuring the correct polarity is • observed: L - Live (brown), E - Earth (green/yellow), N - Neutral (blue) Fig.
- Page 7 e with the cord grip provided nal cover and fasten with the screws provided lug into a socket outlet, switch on and check for correct operation. See below for ent unwanted tampering with the socket outlet, a lug feature with a 6mm hole is lock or similar locking security device (not included).
- Page 8 ACCESSORIES LTD ACCESSORIES LTD...
Need help?
Do you have a question about the OPRCDKIT and is the answer not in the manual?
Questions and answers