AEG S53220CSW2 User Manual page 34

34 www.aeg.com
12. Place the lower door on the lower
hinge pivot (9).
13. Screw off the middle cover plugs and
screw them into the hole on the
opposite side (10).
14. Put the middle hinge on the
opposite side and fix it with the
screws (11).
11
15. Place the upper door on the middle
hinge pivot (12).
16. Fix the door with upper hinge and fix
it with screws of it (13).
7
8
10
o
180
9
13
17. Attach the door handles and plugs
on the opposite side.
C
C
Do a final check to make
sure that:
• All screws are tightened.
• The magnetic seal
adheres to the cabinet.
• The door opens and
closes correctly.
If the ambient temperature
is cold (i.e. in Winter), the
gasket may not fit perfectly
to the cabinet. In that case,
wait for the natural fitting of
the gasket.
In case you do not want to
carry out the above
mentioned operations,
contact the nearest
Authorised Service Centre.
The Authorised Service
specialist will carry out the
reversibility of the doors at
your cost.
12
B
A
B
A