Casio Exilim EX-Z57 User Manual page 96

OTHER RECORDING FUNCTIONS
NOTE
• You can play back an audio file recorded in the
Audio Snapshot mode on your computer using
Windows Media Player.
Recording audio for a snapshot creates two separate
files: one for the image data and one for the audio
data. Each file is stored in a different folder in
camera memory (page 177).
1.
Press [ ] (REC), and then select "
( + )" as the recording mode (page 49).
• This enters the Audio Snapshot mode and causes
" " to appear on the monitor screen.
• You can use the key customization feature (page
106) to configure the camera to enter the Audio
Snapshot mode whenever you press [ ] or [ ] while
in a REC mode.
2.
Press the shutter
button to record the
image.
• After the image is
recorded, the camera
enters audio recording
standby, with the image
you just recorded on the
monitor screen.
Remaining recording time
96
• You can cancel audio recording standby by pressing
[MENU].
3.
Press the shutter button to start audio
recording.
• The operation lamp will flash green while recording is
in progress.
• If you have the monitor screen turned off (page 27),
the monitor screen turns on while you are adding
audio to a snapshot.
4.
Recording stops after about 30 seconds or
when you press the shutter button.
IMPORTANT!
• You cannot use the Audio Snapshot mode in
combination with triple self-timer.