Casio Exilim EX-Z57 User Manual page 46

GETTING READY
IMPORTANT!
• Recording images without configuring the clock
settings causes incorrect time information to be
registered. Be sure to configure the clock settings
before using the camera.
• A built-in backup battery retains the date and time
settings of the camera for about two days if the
camera is not supplied with power. Date and time
settings will be cleared when the backup battery
goes dead. The following are the conditions when
power is not being supplied to the camera.
— When the rechargeable battery is dead or
removed from the camera
— When power is not being supplied to the camera
from the USB cradle while the rechargeable
battery is dead or removed from the camera
• The date and time setting screen will appear on the
monitor screen the next time you turn on the camera
after the date and time settings have been cleared.
If this happens, reconfigure the date and time
settings.
• If you make a mistake when setting the language or
clock with the following procedure, you will need to
use the camera's menu to individually change the
language (page 144) or clock (page 141) settings.
• You will not be able to edit time data stored with
images that are recorded while the camera's time
setting is wrong.
• Even if you configure date and time settings, the
date and time are not stamped into the images
themselves. Note, however, that you can specify
inclusion of the date inside of an image when printing
(page 162).
46