Page 1
Mod. 1375 DS 1375-033A LBT 20832 SWITCH POE MANAGED PER CITOFONIA POE MANAGED SWITCH FOR VIDEO INTERCOM INTEGRATION Sch./Ref. 1375/701 (DGS-1100-08P) LIBRETTO DI INSTALLAZIONE INSTALLATION BOOKLET POE Ports 100M On = Link, Blink = Act POE Active POE Fault...
Page 2
ITALIANO DESCRIZIONE Il dispositivo Sch. 1375/701 permette l’integrazione del sistema iPerTAlk con il sistema Ipercom quando si desidera separare la rete aziendale in cui è installato iPerTAlk dalla rete Ipercom. Lo switch è dotato della funzione Power over Ethernet (PoE), dispone di 8 porte con possibilità di funzionamento a Gigabit Ethernet (1000Mbps), Fast Ethernet (100Mbps) o Ethernet (10Mbps).
INSTALLAZIONE DEL DISPOSITIVO Lo switch Sch. 1375/701 può essere installato a tavolo inserendo sulla base del dispositivo gli appositi piedini in gomma forniti a corredo, oppure ad appoggio parete tramite viti e tasselli forniti a corredo, vedi di seguito. n.2 tasselli Ø 5 mm n.2 vite autofilettanti...
SCHEMA DI COLLEGAMENTO In merito alla modalità di collegamento del dispositivo Sch. 1375/701 per l’integrazione del sistema iPerTAlk con il sistema Ipercom, attenersi ESCLUSIVAMENTE alle indicazioni presenti nel seguente schema di collegamento. ATTENZIONE! Prima di connettere lo switch Sch. 1375/701 al sistema Ipercom è necessario che i sistemi Ipercom e iPerTAlk siano opportunamente configurati.
Potenza: ............................90-110 VA Frequenza: ............................50-60 Hz Tensione di uscita dell’alimentatore e di ingresso dello switch Sch. 1375/701: ........54 V Temperatura di funzionamento: ....................0 °C÷ +40 °C Dimensioni (L x A x P):....................171 x 28,6 x 97,8 mm Per la dichiarazione di conformità...
Page 6
ENGLISH DESCRIPTION The device Ref. 1375/701 allows the integration of the iPerTAlk system with the Ipercom system when you want to separate the network in which iPerTAlk is installed from the Ipercom network. The switch is equipped with the Power over Ethernet (PoE) function. It has 8 ports with the possibility of Gigabit Ethernet (1000Mbps), Fast Ethernet (100Mbps) or Ethernet (10Mbps) operation.
INSTALLATION OF THE DEVICE The switch Ref. 1375/701 can be installed on the table by inserting the appropriate rubber feet on the base of the device, or on the wall using the screws and anchor plugs provided, see below. Two anchor plugs Ø 5 mm Two self-threading screws, Ø...
WIRING DIAGRAM Follow EXCLUSIVELY the instructions in the wiring diagram below for the connection mode of the device Ref 1375/701 to integrate the iPerTAlk system with the Ipercom system. IMPORTANT! The Ipercom and iPerTAlk systems must be properly configured before connecting the switch Ref.
Power: ............................. 90-110 VA Frequency: ............................50-60 Hz Power supply output voltage and switch input voltage Ref. 1375/701 ..........54 V Working temperature range:......................0 °C÷ +40 °C Dimensions (L x H x P): ....................171 x 28,6 x 97,8 mm For the device declaration of conformity, go to www.dlink.com...
Page 10
ITALIANO DIRETTIVA 2012/19/UE DEL PARLAMENTO EUROPEO E DEL CONSIGLIO del 4 luglio 2012 sui rifiuti di apparecchiature elettriche ed elettroniche (RAEE) Il simbolo del cassonetto barrato riportato sull’apparecchiatura o sulla sua confezione indica che il prodotto alla fine della propria vita utile deve essere raccolto separatamente dagli altri rifiuti. L’utente dovrà, pertanto, conferire l’apparecchiatura giunta a fine vita agli idonei centri comunali di raccolta differenziata dei rifiuti elettrotecnici ed elettronici. In alternativa alla gestione autonoma è possibile consegnare l’apparecchiatura che si desidera smaltire al rivenditore, al momento dell’acquisto di una nuova apparecchiatura di tipo equivalente.
Need help?
Do you have a question about the 1375/701 and is the answer not in the manual?
Questions and answers