Vantrue Element 1 User Manual page 28

EN
Collision Detection
When collision detection is enabled, the
recording interface, indicating that the camera is currently using collision
detection mode. Collision detection sensitivity can be adjusted from 1 to
5 levels. You can adjust according to your habits as well as the surround-
ings of the car.
When the Collision Detection is turned on, and no movement is detected
after 5 minutes of recording (5-minute entry mechanism for short), then
Collision Detection is activated with a Collision Detection icon at the
bottom right corner of the screen, and the camera automatically turn off.
When the dash cam is turned off, it will start to record for 1 minute after
being shaken, then turn off the dash cam again.
2560x1440P 30FPS
120
00:00:37
05-01-2022 14:09:07 MP/H
2560x1440P 30FPS
120
00:00:37
05-01-2022 14:09:07 MP/H
- 23 -
icon will be displayed on the