Vantrue Element 1 User Manual page 21

EN
-REC Status Light: Default setting is ON. You can choose to turn on/off the
recording status light.
-Rotate Display: Default is off. You can choose to flip the video screen up
and down(180 Degree).
-Number Plate: Press the
button to select the number or letter to be
set. After setting, your license plate number can be displayed in the
recorded video.
-Stamp: Enable or disable the watermark stamp on video and photos.
The watermark stamp includes date and time label, VANTRUE label,
license plate number, GPS location information, and speed label. All
enabled by default.
-Time Lapse: The default value is disabled. You can choose to enable
1FPS/5FPS/10FPS/15FPS.
-Parking Mode: You can choose the parking mode you need, including
Collision Detection/Motion Detection/Low Bitrate Recording/Low
Framerate Mode/OFF.
-GPS Setting: GPS is enabled by default. GPS ON/OFF settings, speed unit
settings, and GPS information are all set here.
B. System Setup
-Language: Available languages are Engish/Français/Español/Deutsch/I-
taliano/简体中文/русский/日本語/Polski.
-WiFi: The default setting is Off. After WiFi is enabled, mobile phones can
connect to WiFi and operate the dashcam through mobile phone
interfaces.
-Display Setting: The default setting is Full Screen mode. You can switch it
to panorama mode.
-Voice Assistant: The default sensitivity is Standard. Voice commands
can be recognized after the option is turned on. You can choose options
such as low sensitivity/high sensitivity/standard/off.
- 16 -