Vesync App Troubleshooting - Levoit VeSync Classic 300S User Manual

EN
V E S Y N C A P P T R O U B L E S H O O T I N G
Why isn't my humidifier connecting to the
VeSync app?
•
Make sure your phone has Bluetooth®
turned on and is not currently connected
to another Bluetooth device.
•
During the setup process, you must
be on a secure 2.4GHz Wi-Fi network.
Confirm that the network is working
correctly.
•
Make sure the Wi-Fi password you
entered is correct.
• Make sure your humidifier and phone are
within 10 m / 30 ft of each other.
• Reset the humidifier by pressing and
holding
connecting again.
My humidifier is offline.
• Make sure the humidifier is plugged in.
The humidifier may appear to be offline
if it is unplugged, or if the outlet does not
have power.
• Refresh the VeSync menu by swiping
down on the screen.
• Make sure your router is connected to
the internet and your phone's network
connection is working.
• Reset the humidifier using one of
these options:
a.
Delete the humidifier from the
VeSync app. Swipe left (iOS®) or
press and hold (Android), then tap
Delete. Then reconfigure your
humidifier with the VeSync app.
b.
Press and hold
Then reconfigure your humidifier
with the VeSync app.
Note: Power outages, internet outages,
or changing Wi-Fi routers may cause your
humidifier to go offline.
22
for 15 seconds. Then try
for 15 seconds.
The VeSync app is displaying an incorrect
humidity percentage while the humidifier
is turned on.
•
The room may be larger than the
humidifier's effective range. Move to a
room smaller than 47 m² / 505 ft².
•
Moisture may have built up inside the
humidity sensor. Turn off the humidifier
and allow the sensor to air dry. Make sure
the nozzle is facing away from the sensor
so that mist does not settle on the sensor
Getting To Know Your
(see diagram in
Smart Humidifier
If your problem is not listed, please contact
Customer Support
(see page
, page 5).
24).