Levoit VeSync Classic 300S User Manual page 19

Reassembling
1.
Flip the water tank over and place
the noise silencer back into the tank.
[Figure 4.20]
Figure 4.20
2.
Place the water filter back into the tank
and rotate it clockwise to secure it in
[Figure 4.21]
place.
Figure 4.21
3.
Place the float back into the base chamber:
a.
Make sure the correct side of the
float is facing up.
Figure 4.22
[Figure 4.22]
b.
Insert the smaller prong into the
closed side of the float brackets.
[Figure 4.23]
Figure 4.23
c.
Place the larger prong into
the open (U-shaped) side of
the float brackets.
4.
Place the tank back on the base.
Refill the tank, if necessary.
5.
Place the tank properly on the base and
place the tank cover on the water tank.
Storing
Follow the cleaning instructions (see page
15) and allow all parts to dry completely
before storing. Store in a cool, dry location.
EN
19