Download
Share
Print this page
Mash 650cc X-RIDE User Manual
  1. Manuals
  2. Brands
  3. Mash Manuals
  4. Motorcycle
  5. 650cc X-RIDE
  6. User manual

Mash 650cc X-RIDE User Manual

Hide thumbs

Advertisement

Quick Links

650
650
cc cc
USER MANUAL
X-RIDE
X-RIDE

Advertisement

loading
Need help?

Need help?

Do you have a question about the 650cc X-RIDE and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Mash 650cc X-RIDE

Summary of Contents for Mash 650cc X-RIDE

  • Page 1 cc cc USER MANUAL X-RIDE X-RIDE...
  • Page 2 Congratulations ! You are the happy new owner of a MASH which embodies a new spirit, a new trend : a motorcycle with a look and a philosophy «Vintage», synonymous of freedom. Please read this manual thoroughly before using your MASH.
  • Page 3 Important Cautions About running-in of a motorcycle The first 1000 km operation is very important in the entire service life of a motorcycle. A correct running-in can guarantee both the longest service life and the best performance of the vehicle. Running-in can polish machined surfaces and form smooth engagement.

  • Page 4: Table Of Contents

    Observing the following recommendations will ensure the reliability of your motorcycle and prolong its life. The staff of MASH authorized dealers (list available by consulting the website www.mash-motors.fr) have the skills and technical qualifications required to carry out maintenance and provide quality service.

  • Page 5: I Main Technical Data

    I - Main Technical Data Mash X-Ride 650cc Euro 5 Engine Type 4T single cylinder, air-cooled Engine Capacity 644cc Compression Ratio 8.3:1 Idle speed 1500±100RPM Power max 39.3 hp/6000 rpm (29kW) Torque max. 49.2N.m/4500 rpm Ignition Transmission Chain Gearbox 5 speeds...

  • Page 6: User Instruction

    II - User Instruction Preparation before use • Read the user manual carefully This user’s manual describes the standard and safety method as well as basic • Maintain and check the vehicle before using it maintenance. Read it carefully. • It is necessary to have the driving license corresponding to your vehicle and that The images and illustrations in this manual may differ from those of your vehicle, if it is insured...

  • Page 7: Installation Position Of Parts

    8. Engine Light Comes on when there is an engine malfunction. If this warning light comes on on the speedometer, you must go to an authorized Mash dealer in order to carry out a diagnosis. 9.Neutral light: Comes on in neutral...

  • Page 8: Ignition Switch

    IV - Ignition switch Headlights - Position indicator Turn the main ignition key to position , the headlights come on automatically. The ignition switch controls the ignition and lighting circuits and allows the steering to be locked. Its various positions are described below. Position Fonction Position (OFF) All circuits are off: the key can there-...

  • Page 9: Control System

    V - Control system Horn Button Left handlebar control system Turn the key switch to the ON position, press the horn button and it will emit a sound Dimmer switch Headlight flasher switch Press the button, using the switch allows The flasher can be used to signal its presence.

  • Page 10: Essentials Of Driving

    VI - Essentials of driving Caution Make sure that the vehicle is always in neutral position (N or 0) and always Fuel tank cap operate the clutch lever before starting the engine To open the tank cap, insert the key and turn it To start the engine clockwise.
  • Page 11 • Always start the vehicle first and start as gently and carefully as possible. If you park the motorcycle on a slope, stop it uphill to prevent it from • If you hear any abnormal noise while driving, contact a MASH dealer to have descending.

  • Page 12: Controls And Setting

    VII - Controls and setting Parking and using the steering lock Place the motorcycle on level ground and put on the side stand. Running-in Then turn the handlebars to the stop on the left side and position the key switch in The importance of a good running-in of the new vehicle has been stressed in the the steering lock position (padlock logo).
  • Page 13 Engine oil Pre-ride inspection Before road, remember to check the following points. Never underestimate the Replacing the engine oil. importance of inspection. Engine oil plays an important role in the normal operation of the engine and for Element Control to be carried out this reason it is necessary to check the engine oil periodically and to renew it after the Handlebar Ensure that direction is:...
  • Page 14 First turns of the wheel with the motorcycle Caution Start the engine with the transmission in neutral, the clutch engaged and the rider in the normal driving position. Pass a gear report Press down firmly on the clutch grip, wait a brief moment, lower the selector to engage first gear, gently turn the throttle toward you and slowly and smoothly release the clutch lever.

  • Page 15: Inspection And Maintenance

    To ensure your safety, it is recommended that inspection and The greater the braking distance the faster the vehicle speed is. Be sure to maintenance be performed by your authorized MASH dealer. correctly assess the distance to the vehicle or object in front of you to brake Caution accordingly.
  • Page 16 * Steering, bearings * Exhaust and top engine mounting screws Legend: I: Carry out an inspection, cleaning, adjustment, tightening, lubrication or replacement. N: Cleaning. R: Replacement. S: Tightening * This item should be serviced by a MASH dealer Back to summary...
  • Page 17 Respect the polarity of the battery by connecting the red wire to the positive (+) Spark plug terminal and the black wire to the negative (-) terminal. Improper connection will After driving the first 1000 km, then every 3000 km, clean the carbon deposits from damage the charging system and the battery.
  • Page 18 Note: When draining, clean the dipstick and replace the oil filter. Engine oil change Warning The engine of your Mash is fitted with a petrol Engine oil replacement should be done while the engine is still warm to allow the injection system. It is therefore not possible to fluid to drain completely.
  • Page 19 If the ABS warning light comes on on the speedometer, it is necessary to go to an - If you notice oil leaks and blockages, contact your Mash dealer for service. authorized Mash dealer in order to carry out a precise diagnosis.
  • Page 20 Once the position has been adjusted, lock it using the lock nut (2). Please maintain The proper functioning of the brakes is essential for driving safety. Have the brake system periodically inspected by your authorized MASH dealer. a clearance of between 10 and 20 mm (3).
  • Page 21 Exhaust pipe Warning Brake fluid is poisonous. In case of accidental ingestion, spit it out vigorously. It is advisable to stay away from the exhaust pipe after a long journey to avoid any In case of contact with skin or eyes, rinse thoroughly with clean water and consult risk of burns a doctor immediately.
  • Page 22 / fuel mixture. Prohibition and inability to adjust the injection system. Therefore, it is not possible and strictly forbidden to adjust the motorcycle’s injection system. If the EFI warning light on the meter comes on, you must go to an authorized Mash dealer in order to carry out a diagnosis.
  • Page 23 Adjusting the transmission chain Tires To adjust: Check the tire pressure and their tread after the first 1000 km, then every 3000 1. Secure the motorcycle on its side stand or center stand (if equipped). km. In addition to periodic checks, get in the habit of checking tire pressure from 2.
  • Page 24 Storage and cleaning 2. Remove the spark plug; press the starter to let the engine run for a few moments before reinstalling the spark plug. Prolonged non-use of the motorcycle during winter or another season requires 3. Replace the battery. Note: Do not forget to connect the positive pole before the specific operations requiring suitable materials, equipment and techniques.
  • Page 25 Cleaning : Cleaners that are too acidic or aggressive are not recommended for washing the motorcycle. Particularly at the level of axles, bearings, levers, pivots, wheels and spokes. If, however, it is necessary to use it for stubborn stains, follow the instructions and application times for the product.
  • Page 26 Copyright in this manual and its ultimate interpretation is ours. Under no circumstances may this document or any part of it be reproduced or cited without our prior written permission. All information, descriptions, illustrations and specifications contained herein reflect the state of our knowledge at the time of publication. However, we reserve the right to modify this manual at any time in the event of improvements or other changes.
  • Page 27 Trouvez votre revendeur JOIN US ON SOCIAL NETWORKS: @MASH_MOTORCYCLES @MASHMOTORCYCLES @MASH MOTORS FRANCE Mash préconise Mash préconise...