Applied Ballistics Options; Quickly Editing Shooting Conditions; Environment; Editing The Environment - Garmin TACTIX 7 Owner's Manual

Applied Ballistics Options

From the watch face, press START, select Applied Ballistics, and press START.
Quick Edit: Allows you to quickly edit the range, direction of fire, and wind information
Conditions, page 39).
Range Card: Allows you to view data for various ranges based on user input parameters. You can change fields
(Customizing the Range Card Fields, page
page 40), and set the base range
Target Card: Allows you to view range, elevation, and windage for ten targets based on user input parameters.
Environment: Allows you to customize atmospheric conditions for your current environment. You can enter
custom values, use the pressure and latitude values from the internal sensor in the device, or use the
temperature value from a connected tempe
Target: Allows you to customize long-range shooting conditions for your current target. You can change the
selected target and customize conditions for up to ten targets
Profile: Allows you to customize gun properties
Bullet Properties, page
selected profile (Selecting a Different Profile, page
page 41).
Change Fields: Allows you to customize the data fields on the profile data screen
Screen, page 41).
Setup: Allows you to select the units of measure and enable the windage and elevation solution options.

Quickly Editing Shooting Conditions

You can edit the range, direction of fire, and wind information.
1 From the Applied Ballistics app, press START.
2 Select Quick Edit.
TIP: You can press DOWN or UP to edit each value, and press START to move to the next field.
3 Set the RNG value to the target distance.
4 Set the DOF value to your actual direction of fire (either manually or by using the compass).
5 Set the W 1 value to the low wind speed.
6 Set the W 2 value to the high wind speed.
7 Set the DIR value to the direction the wind is coming from.
8 Press BACK to save your settings.

Environment

Editing the Environment

1 From the Applied Ballistics app, press START.
2 Select Environment.
3 Select an option to edit.

Enabling Auto Update

You can use the auto update feature to update the latitude and pressure values automatically. When connected
to a tempe sensor, the temperature value also updates. The values update every five minutes.
1 From the Applied Ballistics app, press START.
2 Select Environment > Auto Update > On.
Applied Ballistics
®
40), edit the range increment
(Setting the Base Range, page
sensor
™
(Editing Gun Properties, page
41), and output units of measure for your current profile. You can change the
(Editing the Range Increment,
40).
(Environment, page 39).
(Changing the Target, page
41), bullet properties
40) and add additional profiles
(Quickly Editing Shooting
40).
(Editing
(Adding a Profile,
(Customizing the Profile Data
39