Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for TruGolf TRUFLIGHT 2
Summary of Contents for TruGolf TRUFLIGHT 2
- Page 1 TRUFLIGHT SBC MANUAL...
-
Page 2: Table Of Contents
TABLE OF TRUFLIGHT2™: CONTENTS HOW IT WORKS The TruFlight 2 high-speed camera tracking system utilizes two camera TruFlight2™:How It Works simultaneously to capture Club and Ball data: one Club Camera, which • TruFlight 2™ Components captures Clubhead Speed, Face Angle, Swing Path, Ball Direction and Ball Ball Placement Speed, and one Ball Cameras, which captures Launch Angle. -
Page 3: Ball Placement
E6 CONNECT: https://e6golf.com/update/e6-connect/ IMPORTANT! WHEN USING THE TRUFLIGHT 2 CAMERA SYSTEM, Run and ensure that TruFlight 2 is the selected Tracking System. THE BALL IS PLACED IN THE TEE POSITION WHEN HITTING A FULL TRUFLIGHT 2 UTILITIES: https://trugolf.com/support/ SHOT; WHEN PUTTING, THE BALL MUST BE PLACED BEHIND THE TEE POSITION AS SHOWN. -
Page 4: Wiring
WIRING Position the ball camera housing: • To identify the center point where the Ball Camera enclosure should be mounted, place a piece of tape on the ground on the centerline of IMPORTANT! DO NOT PLUG USB CABLES INTO COMPUTER the simulator 48”... -
Page 5: Test Camera Connections
Adjust the LIGHT BLUE horizontal line up or down as needed. • Open TruFlight 2 Configuration Utility located on the desktop. • Ensure Club Camera Lights are turned on. • Click Show Club Camera. -
Page 6: Ball Camera Focus
BALL CAMERA FOCUS GREYSCALE SETTINGS The focus of the camera lens in the Ball Camera Enclosure has been pre- • Click the Show Ball Camera button, then click the Ball Camera focused for the system when it was tested. If the ball image looks fuzzy on Refresh button. -
Page 7: Tee Box Location
CLUB CAMERA TEE BOX LOCATION • Place a golf ball in the tee position. SETTINGS • Select the Tee Pos checkbox (left-center, bottom of the screen). • Move the mouse cursor over the golf ball (this will turn the cursor into “crosshairs”), and then click in the exact center of the golf ball. -
Page 8: Aim Camera
AIM CAMERA LIVE WINDOW HEIGHT MEASUREMENT • Place the TruFlight 2 Calibration Grid onto the hitting mat aligning the • Refer to the numbers visible in the Live Window and identify the three holes in the calibration grid to the three dots on the hitting mat. -
Page 9: Greyscale Settings
ADDITIONAL GREYSCALE SETTINGS • Remove template. SETTINGS • Click on the Focus button, to the right of this button you will see a continuous scan of the high and low greyscale values. • For the greyscale setting to be correct, the greyscale numbers hould CALIBRATING LAUNCH ANGLES appear between 25 and 80. -
Page 10: Ball Detection Timing
IN-GAME: (reduce Ball Trigger Distance) (increase Ball Trigger Distance) • Exit out of the TruFlight 2 Configuration tool. • Launch E6 Connect and hit multiple shots with Wood, Iron, Wedge and Putter. • If there are any issues exit E6 Connect and enter back into the configuration utility and hit the shots that are having issues. -
Page 11: Faq & Troubleshooting
The X Width number should stay at 180. WHAT IF THE TRUFLIGHT 2 CONFIGURATION TOOL DOESN’T LAUNCH? • Click Ball Camera Refresh to view the new border lines. Check connections and the device manager to make sure that the •... -
Page 12: Glossary
GLOSSARY Driver Width Minimum size of driver in inches. Wood Width ADVANCED SETTINGS Minimum size of wood in inches. Iron Width There are many settings shown in the Advanced Settings section of the Minimum size of iron in inches. Configuration Utility. Below is a description for those that you many need to adjust when working with Tech Support. - Page 13 TRUGOLF .COM #DRIVINGREALITY #GOLFCONNECTED...
Need help?
Do you have a question about the TRUFLIGHT 2 and is the answer not in the manual?
Questions and answers