1. Manuals
  2. Brands
  3. TruGolf Manuals
  4. Video Gaming Accessories
  5. TruFlight 2
  6. Manual

TruGolf TruFlight 2 Manual

Hide thumbs Also See for TruFlight 2:
Table of Contents

Advertisement

Quick Links

TRUFLIGHT
2
MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TruFlight 2 and is the answer not in the manual?

Questions and answers

Related Manuals for TruGolf TruFlight 2

Summary of Contents for TruGolf TruFlight 2

  • Page 1 TRUFLIGHT MANUAL...

  • Page 2: Table Of Contents

    TABLE OF TRUFLIGHT2™: CONTENTS HOW IT WORKS The TruFlight 2 high-speed camera tracking system utilizes three cameras TruFlight2™:How It Works simultaneously to capture Club and Ball data: one Club Camera, which • TruFlight 2™ Components captures Clubhead Speed, Face Angle, Swing Path, Ball Direction and Ball Ball Placement Speed, and two Ball Cameras, which capture Launch Angle.

  • Page 3: Ball Placement

    E6 CONNECT: https://e6golf.com/update/e6-connect/ IMPORTANT! WHEN USING THE TRUFLIGHT 2 CAMERA SYSTEM, Run and ensure that TruFlight 2 is the selected Tracking System. THE BALL IS PLACED IN THE TEE POSITION WHEN HITTING A FULL TRUFLIGHT 2 UTILITIES: https://trugolf.com/support/ SHOT; WHEN PUTTING, THE BALL MUST BE PLACED BEHIND THE TEE POSITION AS SHOWN.

  • Page 4: Wiring

    WIRING Position the ball camera housing: • To identify the center point where the Ball Camera(s) enclosure should be mounted, place a piece of tape on the ground on the IMPORTANT! DO NOT PLUG USB CABLES INTO COMPUTER centerline of the simulator 48” or 123cm toward the screen from the BEFORE INSTALLING SOFTWARE.

  • Page 5: Test Camera Connections

    TEST CAMERA CONNECTIONS both balls are parallel to the horizontal line. TEST CLUB CAMERA • Open TruFlight 2 Configuration Utility located on the desktop. • Ensure Club Camera Lights are turned on. • Click Show Club Camera. • Click on Start.

  • Page 6: Ball Camera Focus

    BALL CAMERA FOCUS CLUB CAMERA FOCUS • While the Camera Alignment Grid check box is still selected and the • Click Show Club Camera. ball is still on the ground from the previous step, select the Camera • Click Start. Focus/GS box.

  • Page 7: Aim Camera

    CLUB CAMERA AIM CAMERA • Place the TruFlight 2 Calibration Grid onto the hitting mat aligning the SETTINGS three holes in the calibration grid to the three dots on the hitting mat. LIVE WINDOW HEIGHT MEASUREMENT • Refer to the numbers visible in the Live Window and identify the height using the numbers on the Calibration Grid visible through the Live Window.

  • Page 8: Greyscale Settings

    Live Window). • For the greyscale setting to be correct, the greyscale numbers should • Referring to the Live Window in the TruFlight 2 Configuration tool, appear between 35 and 80. manually turn the focus until the Length and Width numbers are as small as possible.

  • Page 9: Ball Camera Settings

    BALL CAMERA GREYSCALE SETTINGS • Click the Show Ball Camera button, then click the Ball Camera SETTINGS Refresh button. • Select Camera Alignment Grid • Select Camera Focus/GS DETECTION WINDOW • The High GS Val field will show values being refreshed, the result of •...

  • Page 10: Tee Box Location

    ADDITIONAL TEE BOX LOCATION • Place a golf ball in the tee position. SETTINGS • The tee position should be on the right side of the display. If it isn’t, select the Swap Cameras checkbox, and then click the Ball Camera Refresh button.

  • Page 11: Ball Detection Timing

    Greyscale section and repeat those steps. IF EVERYTHING IS TRACKING CORRECTLY, IT’S TIME TO TEST IT IN-GAME: • Exit out of the TruFlight 2 Configuration tool. • Launch E6 Connect and hit multiple shots with Wood, Iron, Wedge and Putter.

  • Page 12: Troubleshooting & Frequently Asked Questions

    TROUBLESHOOTING WHAT IF CLUB HEAD SPEEDS ARE OFF (EXAMPLE BELOW)? & FREQUENTLY ASKED QUESTIONS WHAT IF MY CLUBS DON’T TRACK IN THE CONFIGURATION TOOL? There are clubs that at times will not be recognized by the Club Repeat steps for Club Camera Gain. Head Camera.

  • Page 13: Glossary

    GLOSSARY Wedge Width Minimum size of wedge TFBallSize CTBallAngleAdj Size of the ball that the camera expects to see This value is used to tweak the ball direction. It is a pretty solid value TFBallSizeTolerence that doesn’t need to be adjusted too much depending on booth Tolerance given to ensure the ball is seen at different speeds, height.
  • Page 15 TRUGOLF .COM #DRIVINGREALITY #GOLFCONNECTED...

This manual is also suitable for:

Truflight 2

Table of Contents