Warning Indications - Panasonic LUMIX DMC-F1PP Operating Instructions Manual

Panasonic camcorder - camcorder/digital camera user manual
Hide thumbs Also See for LUMIX DMC-F1PP:
Table of Contents

Advertisement

KC42-PP.book 88 ページ 2002年12月19日 木曜日 午後4時36分

Warning Indications

[NO MEMORY CARD]
Insert the Memory Card.
[THIS MEMORY CARD IS
PROTECTED]
Cancel the Memory Card lock.
[NO VALID IMAGE TO PLAY]
Carry out playback after recording or
after inserting the Memory Card with a
recorded image.
[MEMORY CARD FULL] / [NO
ENOUGH MEMORY IN THE CARD]
Insert a new Memory Card or delete
unnecessary data.
[MEMORY CARD ERROR]
Failed access to Memory Card.
Insert the card again.
[READ ERROR]
Data reading error.
Play it back again.
[WRITE ERROR]
Data writing error.
Turn the camera [OFF] and remove the
card. Then insert the card and turn the
camera back [ON]. Be sure camera is
[OFF] before removing or inserting the
card to avoid damaging the card.
[PLEASE SET THE CLOCK]
This message is displayed when you
use the camera for the first time or you
do not use the camera for a long time.
Set the clock again.
[THIS PICTURE IS PROTECTED]
After cancelling the protect setting, you
can delete or overwrite the image.
Others
[THIS PICTURE CAN'T BE
DELETED] / [SOME PICTURES
CAN'T BE DELETED]
If the image is not based on the DCF
standard, it is not possible to delete
selected pictures.
[NUMBER OF PRINT IS OVER]
You have exceeded the number of
images that can be set at once with
multi-deleting setting.
[CAN'T BE SET ON THIS PICTURE]
/ [CAN'T BE SET ON SOME
PICTURES]
If the image is not based on the DCF
standard, it is not possible to set the
DPOF.
[MEMORY CARD ERROR
FORMAT THIS CARD?]
The format of this card cannot be
recognized by the camera. Format the
card again with the camera.
[REC MODE DIAL IS NOT IN THE
PROPER POSITION]
This message is displayed when you
turn on the camera with the mode dial in
the wrong position.
Rotate the mode dial to the proper
position.
88

Advertisement

Table of Contents
loading

Table of Contents