Table of Contents
Advertisement
KC42-PP.book 15 ページ ２００２年１２月１９日 木曜日 午後４時３６分
Inserting the Card
3,7
1
4
5,6
Preparation
[Preparation]
• Check that the power switch is set to [OFF]
and the lens is stored.
[Inserting the card]
1
Slide the door in the direction of the
1,4
arrow to open the Memory Card/battery
door.
2
Insert the card all the way in until it
clicks.
• Check the direction of the card.
• Do not touch the connection terminals on the
back side of the card.
3
Close the Memory Card/battery door.
[Removing the card]
4
Slide the door to the direction of the
arrow to open the Memory Card/battery
door.
5
Press the card to release.
6
Pull the card out.
7
Close the Memory Card/battery door.
• If you are using a MultiMediaCard type memory
card and the battery card cannot close, the card
may be installed backwards. Remove the card
and reverse it, then try to close the door again.
• If the card cannot be fully inserted, verify whether
the direction of the card is correct.
• We recommend that you use a Panasonic
branded SD Memory Card. (Use only the
genuine card)
• If the card is not fully inserted, the card may be
damaged.
15
Advertisement
Table of Contents
