Table of Contents
Advertisement
Specifying the File Name Serial
Number Generation Rule
Use the following procedure to specify the rule that governs
generation of the serial number used in file names (page 179).
1.
Press [MENU].
2.
On the "Set Up" tab, select "File No." and then
press [ ].
3.
Use [ ] and [ ] to select the setting you want
and then press [SET].
To have the camera do this:
Remember the current number and
always assign the next one, even if all
files are deleted or if the memory card is
replaced.
Restart the serial number from 0001
whenever all files are deleted or the
memory card is replaced.
Changing the Camera Date and Time
Setting
When changing the date and time setting, be sure to do so for
your Home City (the location where you normally use the
camera). If you already have your Home City setting configured
correctly, you can use the procedure under "Setting the Date
and Time for Your Home City" (page 193) to change the current
time setting only, if you want.
IMPORTANT!
• Changing the time and date setting without correctly
configuring your Home City setting first will cause all of the
Select this
World Time (page 194) dates and times to be off.
setting:
■
Selecting Your Home City
1.
Press [MENU].
Continue
2.
On the "Set Up" tab, select "World Time" and
then press [ ].
Reset
This displays the current World Time settings.
192
OTHER SETTINGS
Advertisement
Table of Contents
