Panasonic DMR E50 Operating Instructions Manual page 66

Adding, deleting and moving channels
Use this function if:
≥Channels were not set correctly using automatic tuning.
≥A channel that should have been set wasn't.
≥A channel's reception is poor and you want to delete it.
Preparation
≥Switch [DVD, TV] (15) to "DVD".
≥Press [FUNCTIONS] (11) to show the FUNCTIONS window.
Use [3, 4, 2, 1] (10) to select "SETUP" and press
1
[ENTER] (10).
≥The SETUP screen appears.
Use [3, 4] (10) to select the "Tuning" tab and
2
press [2] or [1] (10).
Use [3, 4] (10) to select "Manual" and press
3
[ENTER] (10).
SETUP
Manual
Auto-Setup Restart
Download
Tuning
Settings
Disc
Picture
Sound
Display SELECT
TAB
Connection
ENTER
RETURN
Use [3, 4, 2, 1] (10) to select the desired TV
4
station and use the [A], [B], [C] buttons ((29), (28),
(33)) to select "Delete", "Add", "Move".
Manual Tuning
Pos Name Ch Pos Name
1 BBC 1 22 11
2 BBC 2 23 12
3 ITV 24 13
4 CH4 25 14
5 CH5 26 15
6 16
SELECT
7 17
8 18
ENTER
9 19
RETURN
10 20
Delete Move
Add
A B C D
Follow the operations below.
To delete a programme position "Delete":
Press [A] (29).
To insert a blank programme position "Add":
Press [B] (28).
To move a TV station to another programme position "Move":
Press [C] (33), and then use [3, 4] (10) to select the new
programme position to which you want to assign the TV station.
Press [ENTER] (10).
Press [RETURN] (23).
5
Note
≥Setting can take up to 3 minutes approximately.
≥If downloading of the setup data has been performed, only the
instruction indication "Delete" appears.
Hint
≥If you have performed Manual Tuning to enter TV stations, the
[jj] indication may appear under [Pos/Name] on the display
when programming a VIDEO Plus+ timer recording.
Ch
Changing the unit's settings (continued)
Auto-Setup Restart, Download
You can use the SETUP menus to start Auto Channel setting if
Auto Setup (page 17) fails for some reason.
Preparation
≥Switch [DVD, TV] (15) to "DVD".
≥Press [FUNCTIONS] (11) to show the FUNCTIONS window.
Use [3, 4, 2, 1] (10) to select "SETUP" and press
1
[ENTER] (10).
≥The SETUP screen appears.
Use [3, 4] (10) to select the "Tuning" tab and
2
press [2] or [1] (10).
SETUP
Manual
Auto-Setup Restart
Download
Tuning
Settings
Disc
Picture
Sound
Display SELECT
TAB
Connection
ENTER
RETURN
Use [3, 4] (10) to select "Auto-Setup Restart" or
3
"Download".
Press [ENTER] (10) prepare for Auto Setup start or
4
Download start.
≥Press [ENTER] (10) again to actually start the Auto Setup or
the Download.
5
A message appears asking you to confirm the
operation.
≥Actual screens depend on the operation. Follow the on-
screen instructions.
66