Displaying The Time At The Travel Destination - Panasonic Lumix DMC-LS60 Operating Instructions Manual

Displaying the time at the travel destination

If you set your home area and the travel
destination area when traveling abroad
etc., the local time at the travel destination
area can be displayed on the screen and
recorded on the pictures taken.
• Select [CLOCK SET] to set the current
date and time in advance. (P17)
1 Press [MENU/SET] and then
press w.
2 Press r to select the [SETUP]
menu icon [ ] and then press q.
3 Press e/r to select [WORLD
TIME] and then press q.
SETUP
BATTERY TYPE
CLOCK SET
WORLD TIME
MONITOR
TRAVEL DATE
SELECT
• If you are setting the world time for the
fi rst time, the message [PLEASE SET
THE HOME AREA] appears. If this
message appears, press [MENU/SET]
and then set home area from the screen
shown in step 2 in "Setting the home
area [HOME]".
■ Setting the home area [HOME]
(Perform steps 1, 2 and 3.)
1 Press r to select [HOME] and then
press [MENU/SET].
WORLD TIME
DESTINATION
HOME
10 00 JAN 1 2007
: . .
CANCEL SELECT
Advanced-Shooting
1 / 3
± 0
OFF
MENU
EXIT
MENU
SET
SET MENU
2 Press w/q to select your home area
and then press [MENU/SET].
10:00
Toronto
New York
Miami
Lima
GMT -5:00
SELECT
• The current time is displayed on the top
left of the screen and the time difference
from GMT (Greenwich Mean Time)
is displayed on the bottom left of the
screen.
• If daylight saving time [
the home area, press e. Press e again
to return to the original time.
• The daylight saving time setting for the
home area does not advance the current
time. Advance the clock setting by one
hour. (P17)
MENU
CANCEL
SET
SET
MENU
] is used at
VQT1C63
57