Selecting A Base Unit; Cancelling A Base Unit; Cancelling A Handset - Panasonic KX-TCD440NZ Operating Instructions Manual

L If you changed PIN, enter it (page 22).
8
Press {>}.
L When the handset has been registered
successfully, a confirmation tone will
sound, and w will stop flashing.
Note:
L If all registered handsets start ringing in
step 5, press {x} to stop, then start again
from step 1.

Selecting a base unit

When "AUTO" is selected, the handset will
automatically use any available base unit it
is registered to. When a specific base unit is
selected, the handset will make and receive
calls using that base unit only. If the handset
is out of range of that base unit, no calls can
be made.
1
Press {j}.
2
Press {v} repeatedly to display
"SETTING HS", then press {>}.
3
Press {v} repeatedly to display "SELECT
BS", then press {>}.
4
Press {v} repeatedly to display "AUTO"
or a specific base unit number, then
press {>}.
L The handset starts searching for the
base unit.
Note:
L When a handset is registered to another
base unit, this setting will automatically
change to that base unit's number even if
"AUTO" was selected.

Cancelling a handset

A maximum of 6 handsets can be registered
to a base unit. A handset can cancel its own
registration (or the registration of another
handset) that is stored in the base unit. This
will allow the base unit to "forget" the
handset.
1
Press {j}.
Multi-unit Operation
2
Press {v} repeatedly to display
"SETTING BS", then press {>}.
3
Press {7}.
4
Enter "0000" (default base unit PIN).
L If you changed PIN, enter it (page 22).
5
Press the desired handset number.
L The selected handset number will
flash.
6
Press {>}.
7
Wait until "SETTING BS" is displayed,
then press {ih}.

Cancelling a base unit

A handset can be registered to a maximum
of 4 base units. A handset can cancel a base
unit that it is registered to. This will allow the
handset to "forget" that base unit.
1
Press {j}.
2
Press {v} repeatedly to display
"SETTING HS", then press {>}.
3
Press {v} repeatedly to display
"REGISTRATION", then press {>}.
4
Press {v} repeatedly to display "CANCEL
BS", then press {>}.
5
Enter "0000" (default handset PIN).
L If you changed PIN, enter it (page 21).
6
Press {v} repeatedly to select the
desired base unit number, then press
{>}.
L The selected base unit number will
flash.
7
Press {>}.
8
Press {v} repeatedly to select "YES",
then press {>}.
L To stop cancelling, select "NO".
9
Press {ih}.
Note:
L To register the handset to another base
unit or to the same base unit again, see
manual registration (page 30).
31