Reset With The Safety Cut-Out; Cleaning And Maintenance - Revolution 227862 User Manual

3). Timer control
• A cooking time of maximum 120 minutes can be
set. For this purpose, set the Timer control
to the desired time. The cooking time can be in-
creased or decreased at any time during oper-
ation.
Note: To set time with higher precision, first turn
4). Temp control
• A cooking temperature of maximum MAX (300°C)
can be set. For this purpose, set the Temp control
to the desired temperature.
• Similarly, the cooking temperature can be in-
creased or decreased at any time during oper-
ation.
Note: When the temperature reaches the de-
sired setting, the Temp control
the temperature drops, the Temp control
light on again. This process will be repeated au-
tomatically.
Note: Please note that there is a safety thermal
cut out device for protection located at the lower
rear side of the appliance with a protective cap
EN

RESET with the SAFETY CUT-OUT

Please note that there is a SAFETY CUT-OUT device
for protection located at the lower rear side of the
appliance with a protective cap. This is to turn off
the appliance automatically when the temperature
is too high.
• Unplug the appliance from the electrical outlet
first.

Cleaning and Maintenance

Warning!
• Always disconnect the appliance and open the
door to allow it to cool down completely before
cleaning.
• Never use abrasive sponges or detergents, steel
wool or metallic utensils to clean the interior or
exterior parts of the appliance.
• Avoid the use of sprays as this may damage the
appliance's surface.
16
the Timer control
tion a little, then return back to the desired time
position.
• When the set time ends, the Timer control
the Temp control
sound will be heard.
(See ---> RESET with the SAFETY CUT-OUT ).
This is to prevent the appliance from getting too
high and turn off automatically.
Tips for cooking
• Check the recipe first for the Timer control and
Temp control setting.
will go off. If • Ensure there is enough space between the food
will for the heat to be evenly distributed.
• Cooked food and pa`rts of the appliance get very
hot for some time after cooking. Do not touch
them with bare hands while in use or shortly af-
ter use.
• Allow the appliance to completely cool down.
• Unscrew (tool not supplied) the black protective
cap of the "SAFETY CUT-OUT".
• Push the button to RE-SET the overload circuit.
You should hear a click sound.
• Screw back the protective cap on the "SAFETY
CUT-OUT" button.
• The appliance should be cleaned regularly and
any food deposits removed.
• Wipe out any remaining oil or fat.
• Note: The trays holder on two sides can be un-
screwed (tools not supplied) to detach for clean-
ing.
over the desired time posi-
indicator lights go off and a
&