Auxiliary Screen; Temperature Test - Test Equipment Depot UEi C163 Quick Start Manual

CHANGE FUEL TYPE
CO/CO2
Temp
O2/Eff
Aux
Status
v3
C163
Rotate the dial to either STATUS,
AUX, O2/Eff, CO/CO2 or Temp
setting.

AUXILIARY SCREEN

CO/CO2
O2/Eff Temp
Aux
Status
v3
C163
When performing a combustion
Test, Rotate function rotary dial
to AUX to view the Auxiliary
Test Screen's custom param-
eters.
The AUX screen allows you to assign any of the following parameters on any display line.
O2, CO, Display Fuel Type, CAL, XAIR, LOSS, Efgc, ATM, Ti, ∆T, T2, T1, CO2, COa, or COn. Pressure(C163 and !64 only). NOX
and No (C164 only)

TEMPERATURE TEST

T2 T1
Insert K-type temperature
probes into input T1 and T2.
Exch Test
Press
Type displays on the Status Bar.
Press and Hold
arrow icons display.
Exch Test
AUX displays 5 lines of editable
parameters. To edit line values
Press
displays on the Status Bar.
Press and Hold
Status Bar reads LINE 1.
Rotate function rotary dial to
TEMP for Temperature Test
Screen.
button until the Fuel
until two
button until Edit?
until the
CO/CO2
Temp
O2/Eff
Exch Test
Aux
Status
v3
C163
Press and buttons to
scroll fuel selections.
Press to select fuel.
Press and buttons to
scroll parameter selections.
Press to select a parameter
and advance to the next Line.
Continue until cursor is back to
Status Bar to exit.
TEMP displays T1, T2 and
Differential Temperature.
(Pressure C163 C164 only)