Download
Share
Print this page
claber Dual Select 8488 User Manual
  1. Manuals
  2. Brands
  3. claber Manuals
  4. Lawn and Garden Equipment
  5. Dual Select 8488
  6. User manual

claber Dual Select 8488 User Manual

Hide thumbs Also See for Dual Select 8488:
1
2
3
4
5
6

Advertisement

Quick Links

Download this manual
CLEANING THE FILTER. The timer is protected by a wire mesh lter that ensures long-lasting and trouble-free
operation. The lter should be inspected periodically and washed at the beginning of every season.
Simply remove the lter from the connector and rinse clean under running water.
1
1
For Dual Select (cod.): 8488
FITTING/REPLACING THE BATTERIES. To t or replace the batteries, press the locking tab fully in to release the front part of
the timer, which can then be detached. Fit 2 new batteries in the holder, observing the correct polarity. As long as the batteries
are replaced within 2 minutes, the current settings will remain stored. Re t the front part of the timer to the back and press,
ensuring that the locking tab clicks into place. Important: always replace the batteries at the beginning of each season!
1
1
b
b
a
a
For Dual Select (cod.): 8488
Dual Select
Dual Select
2
2
2
2
b
b
1,5V - AA - Alkaline
Pag. 1
Washing at start
of season
NEW!
User manual
User manual
3
3
3
3
click!

Advertisement

loading

Related Manuals for claber Dual Select 8488

Summary of Contents for claber Dual Select 8488

  • Page 1 Dual Select Dual Select User manual User manual Pag. 1 CLEANING THE FILTER. The timer is protected by a wire mesh lter that ensures long-lasting and trouble-free operation. The lter should be inspected periodically and washed at the beginning of every season. Simply remove the lter from the connector and rinse clean under running water.
  • Page 2 Dual Select Dual Select User manual User manual Pag. 2 INSTALLATION. Fit the timer to a cold water tap, following these simple instructions. The spout of the tap should have a 3/4" male thread (if not, use an adaptor). Screw the clamp collar of the 3/4 " female tting onto the tap. Caution: tighten the collar using hand pressure only.
  • Page 3 Dual Select Dual Select User manual User manual Pag. 3 Immediate start. Within 10 seconds of selecting the programme, press the “A-START” button once only, to programme line A, or “B-START” to programme line B. Releasing the button, the message "0 h" blinks 3 times in the display, and the automatic watering cycle will start immedia- tely.

  • Page 4: Switching Off The Timer

    Dual Select Dual Select User manual User manual Pag. 4 MANUAL WATERING. Press the “A-START” and “B-START” buttons simultaneously and hold them for at least 3 secon- ds; the timer goes into manual mode with the valves o (OFF blinking). Pressing the “A-START” button, line A will be activated for a duration of 5 minutes (which cannot be changed by the user), con rmed by the symbol.
  • Page 5 Dual Select Dual Select User manual User manual Pag. 5 Rain sensor. The timer can be connected to a Rain Sensor, by wire or by radio. When the level of water in the Rain Sensor rises above 5 mm, the watering programme will be suspended automatically, then resumed once the rainwater in the cup has evaporated.
  • Page 6 Dual Select Dual Select User manual User manual Pag. 6 PROTECTION IN WINTER. At the end of the watering season and before winter, disconnect the timer from the tap, remove the batteries and store the device indoors, protected from frost and damp. This will ensure that the timer remains as good as new for many springs and summers to come! OFF! For Dual Select (cod.): 8488...