Maintenance - TZS First AUSTRIA FA-5565 Instruction Manual

InstructIon MAnuAl
PArts dEscrIPtIon
1. thermostat
2. heat select switch
3. power indicator light
4. handle
5. Air outlet
6. air inlet
• Thank you very much for your purchase of our Fan heater.
• Please read the instruction manual carefully and keep it for future use.
IMPortAnt InstructIons
When using electrical appliances, basic precautions should always be followed to reduce
the risk of fire, electrical shock, burns and other injury, including the following:
1. study this instruction manual carefully before using the product.
2. the device is only intended for private and not for any commercial use.
3. remove the unit from its packaging and check to make sure it is in good condition before
using.
4. do not let children play with parts of the packing (such as plastic bags).
5. Check the household voltage to ensure it matches the fan's rated specification.
6. check the power cord and plug carefully before use to make sure that they are not
damaged.
7. Before unplugging the power cord, be sure to turn off the power. When touching the unit, be
sure your hands are dry to prevent from electric shock.
8. do not use near or point the heater to furniture, curtains or other inflammable objects. keep
back of fan heater min. 15cm away from walls or objects to allow free airflow.
9. do not block air intakes or exhaust in any manner to prevent a possible fire.
10. do not use or leave the fan heater unattended when children, old or disabled people are
present.
11. always unplug heater when not in use.
12. prevent water from getting into the housing of the heater during operation or in storage.
hazard of electric shock. always store in dry area with no moisture.
13. do not use in places where there are gas, paint or other inflammable goods and objects
14. this heater is not intended for use in bathrooms, laundry areas and similar indoor locations.
never locate the heater where it may fall into a bath tub or other bodies of water.
15. Do not run the cord under carpeting. Do not cover cord with throw rugs, runners or the like.
arrange cord away from traffic area and where it will not be tripped over.
16. do not use a soft surface, like a bed, where openings may become blocked.
17. use this heater only as described in this manual. any other uses not recommended by the
manufacturer may cause fire, electric shock, or injury to persons and may void warranty.
18. avoid the use of an extension cord because the extension cord may overheat and cause a
risk of fire.
19. do not use outdoors.
m_5565_v03.indd 2-3
4
1
2
3
6
5
2
cAutIons
• This appliance is not a toy.
• This appliance is for household use only.
• Do not immerse the unit in the water.
• To avoid the risk of fire or electric shock do not remove the housing by yourself.
• Any servicing other than cleaning and user maintenance should be performed by an
authorized service representative.
• If the supply cord is damaged, it must be replaced by a special cord or assembly available
from the manufacturer or its service agent.
• Repair should be done by an authorized service personal only.
tHErMostAt
WhEn thE convEctor is sWitchEd on.
1. turn the thermostat knob in a clockwise direction to the max. position.
2. once the room temperature is reached the desired temperature, turn the thermostat knob
slowly in an anti-clockwise direction unit a „click" sound and that is the setting temperature.
now, the convector is switched off and the indicators lights off.
3. the convector will automatically maintain the set temperature. it will switch on when the
room temperature is below and switch off if above the setting.
4. the red indicator shows that the convector is switched on.
oPErAtIon:
When the appliance is switched on for the first time, a slight smell may be emitted. please
ensure sufficient ventilation.
HEAt sEttIng :
the fan heater incorporates a rotation switch you can select the different air by turning the
switch clockwise to:
o oFF
cool air
i WarM air (1000W)
ii WarM air (2000W)
sEcurItY sYstEM:
• The appliance has a security system which automatically switches the convector off when it
is overheating.
• If overheating occurs, remove the plug from socket, push buttons to switch the convector off
and let it cool down for at least 10 minutes. put the plug in the socket and switch the heater
on.
• If you still notice the same defect above mentioned remove the plug from socket and have
the convector serviced by authorized service personal only.

MAIntEnAncE:

• The fan heater only needs regular cleaning on the outside.
• Before you clean the unit, turn the switch to OFF. Remove the plug from socket and wait
until the fan heater cool down.
• Use a damp cloth to wipe the heater housing.
• Do not use water, detergents, abrasive cleaning liquids or chemical agents (alcohol,
gasoline etc.) to clean the unit.
tEcHnIcAl cHArActErIstIcs
230V • 50Hz • 1000-2000W
3
11-11-4 5:52