Philips GC6600 Series User Manual page 9

Problem
Water droplets
come out of the
soleplate.
of the soleplate.
The Calc-Clean
process does not
start.
Possible cause
remaining water may drip out
of the soleplate.
The Calc-Clean process has
You have accidentally started
the Calc-Clean process (see
Cleaning and maintenance').
You have not set the
temperature dial to CALC
CLEAN or you have not
waited for the iron to heat up.
You have not pressed the
2 seconds until the appliance
Solution
Wipe the soleplate dry with a piece of
Cleaning and maintenance').
You have to perform the Calc-Clean
Cleaning and maintenance').
on again. Turn the temperature dial to the
desired temperature setting instead of
CÁLC CLEAN. Let the iron heat up until
the 'iron ready' light lights up steadily.
maintenance'.
maintenance'.
9