8
-
-
Troubleshooting
Problem
The iron does not
produce any
steam.
The Calc-Clean
the appliance
The Calc-Clean
the appliance
The Calc-Clean
the appliance
press the steam
trigger. No steam
comes out of the
soleplate.
The appliance has
switched off.
The appliance
produces a loud
pumping sound.
Possible cause
There is not enough water in
You have not pressed the
steam trigger.
You have set the temperature
dial to 1.
This is the Calc-Clean
reminder.
You have not done or have
not completed the Calc-Clean
process.
You have not done or have
not completed the Calc-Clean
process.
The safety auto-off function
was activated. This happens
automatically when the steam
for more than 10 minutes.
www.philips.com/support
Solution
indication. Press and hold the steam trigger
30 seconds until steam comes out.
Press and hold the steam trigger until steam
comes out.
Turn the temperature dial to 2 or higher.
Perform the Calc-Clean process within
1 hour after the Calc-Clean reminder
is given.
the steam function again (see chapter
the steam function again (see chapter
then to 'on' position.
steam trigger until the pumping sound
the soleplate.