Turbo Air TA1500 Manual page 6

100l/min oil-less
Table of Contents

Advertisement

100L/MIN OIL - LESS COMPRESSOR
CHECK DAMAGED PARTS
Before using the compressor it should be carefully checked
to determine that it will operate properly and perform its
intended function.
Check for the correct alignment of moving parts ensuring
that they do not bind. Check for broken or missing parts
and have them replaced or repaired at an authorised
service facility. Check any other condition that may affect
the operation of the compressor. A guard or any other part of
the compressor that is damaged should be properly repaired or
replaced by an authorised service facility unless otherwise
indicated in this instruction manual.
Any switch that does not operate correctly must be replaced
by an authorised service facility.
DO NOT use the compressor if the 'ON / OFF' button does not
turn the infl ator 'ON' and 'OFF'.
WARNING
Only use Compressor when fully assembled.
Do not attempt to modify the compressor in any way; this will VOID your warranty.
The use of any attachment or accessory other than those recommended in this instruction manual could result in
damage to the compressor and could cause injuries to the operator.
This electric infl ator complies with Australian / New Zealand and International standards and safety requirements.
Repairs should only be carried out by qualifi ed persons using original spare parts. Failure to do so may result in
considerable danger to the operator.
6.
PERSONAL SAFETY
Clothing
Do not wear loose clothing, jewellery or anything that could
get caught in moving machinery.
Hair
Long hair should be tied back or contained in a protective
covering.
Eye Protection
The use of safety goggles is highly recommended (normal
glasses are not suffi cient for eye protection) when using
compressor. Prescription glasses do not have safety lenses.
Footwear
Where there is the risk of heavy objects or if there is a risk
of slipping on wet or slippery fl oors, suitable non–slip safety
footwear should be worn. Protect your feet from dropping
accidents.
Ear Protection
The use of ear protection is highly recommended when
using compressor. The continual noise may damage your ears.
Respiratory Protection
When operating any machinery that creates dust or when
spray painting, an approved dust / fi lter mask must be worn.
When machining concrete, man made fi bres, especially
MDF (Medium Density Fibre board), the resin used in these
materials can be hazardous to your health. Use an approved
face mask with replaceable fi lter.
Do Not Over Reach
Do not over reach. Keep a proper footing and maintain your
balance at all times. Avoid using abnormal stances and
awkward body positions.
Stay Alert
Watch what you are doing, use common sense, and never
operate a compressor when you are tired, drinking alcohol, taking
drugs or if taking medication that causes drowsiness.

Advertisement

Table of Contents
loading

Table of Contents