Table of Contents
Advertisement
Caring for your LED projector
•
Switch off then unplug the LED projector from the power outlet
before cleaning it.
•
When cleaning the LED projector's housing, use a clean soft
cloth dampened with water or a mix of water and neutral
detergent. Wipe it dry using a soft dry cloth.
•
Ensure that the lens is cool before cleaning it. Gently wipe the
lens using a lens cleaning paper. DO NOT touch the lens with
your hands.
•
DO NOT use liquid or aerosole cleaners, benzene, or thinners on
your LED projector.
•
Never operate this LED projector immediately after moving it
from a cold location. When the LED projector is exposed to a
drastic change in temperature, moisture may condense on the
lens and its other internal parts. To prevent this, use the unit two
(2) hours after an extreme or sudden change in temperature
occurs.
•
DO NOT use a spray containing flammable gases to clean the
lens. This may cause a fire due to excessive heat inside the
projector.
•
DO NOT clean the lens while the projector is warming up as this
may cause the lens' surface film to peel off.
•
DO NOT use a hard object to wipe or tap the lens.
8
LED projector E-Manual
Advertisement
Table of Contents
