Caring For Your Led Projector; Proper Disposal - Asus F1 Series E-Manual

Caring for your LED projector

Switch off then unplug the LED projector from the power outlet before cleaning it.
•
When cleaning the LED projector's housing, use a clean soft cloth dampened with water
•
or a mix of water and neutral detergent. Wipe it dry using a soft dry cloth.
Ensure that the lens is cool before cleaning it. Gently wipe the lens using a lens cleaning
•
paper. Do not touch the lens with your hands.
Do not use liquid or aerosol cleaners, benzene, or thinners on
•
your LED projector.
Never operate this LED projector immediately after moving it from a cold location. When the
•
LED projector is exposed to a drastic change in temperature, moisture may condense on the
lens and its other internal parts. To prevent this, use the unit two
(2) hours after an extreme or sudden change in temperature occurs.

Proper disposal

Do not throw your LED projector in municipal
designed to enable proper reuse of parts and recycling. The symbol of the crossed out
wheeled bin indicates that the product (electrical, electronic equipment and
mercury-containing button cell battery) should not be placed in municipal waste. Check
local regulations for disposal of electronic products.
Do not throw the battery in municipal waste. The symbol of the crossed out wheeled
bin indicates that the battery should not be placed in municipal waste.
7 LED projector E‐manual
waste. This product has been