Operating The Onscreen Display Menu - Asus ZenBeam E2 Manual

After you have chosen your prefered language, press the Select
3.
button to set this language for use on your LED projector.
4. You may now start using your LED projector to display files
from your input device. The NO SIGNAL screen may appear if
no input device is connected or cannot be detected by the LED
projector.
Press the Select button on your LED projector's control panel to
5.
launch its onscreen display menu.

Operating the onscreen display menu

Your LED projector is a plug-and-play device that also features an
onscreen display menu that contains a set of programs and settings
that can maximize your use of the LED projector.
Launch the onscreen display menu by pressing the Select button on
the control panel of your LED projector.
NOTE: For more details, refer to the Onscreen display menu options
section in this manual.
To scroll through the options on the onscreen display menu, press
the navigation buttons (up/down/left/right) on your LED projector's
control panel. After adjusting the settings, press the Select button to
save the new settings and press
to go back to the home screen.
LED projector E-Manual
or move the Select button up
35