Operating Your Led Projector; Connect The Led Projector To The Power Adapter - Asus ZenBeam E2 Manual

Operating your LED projector

This portable LED projector allows you to plug and play your devices
so you can easily open multimedia files and hear audio straight from
its built-in SonicMaster speakers.
For your safety and to maintain the quality of this unit, refer to the
following steps when operating your LED projector.

Connect the LED projector to the power adapter

A. Plug the AC power adapter into a 100V~240V power source.
B. Connect the DC power connector into your LED projector.
Charge the LED projector for 5 hours before using it in battery
mode for the first time.
NOTE: The power adapter may vary in appearance, depending on
models and your region.
24 LED projector E-Manual