Screen Calibration; Factory Settings; Fig. 47 Display Brightness Adjustment Screen; Fig. 48 Calibration Screen - Endress+Hauser analytikjena Biometra TOne Operating Manual

Biometra TOne

10.1.6 Screen calibration

10.1.7 Factory settings

Fig. 47 Display brightness adjustment screen
To calibrate the screen, follow the instructions and touch the screen at the center of the
displayed circle. This procedure is repeated three times at different positions on the dis-
play. If, at the end of the procedure, a small cross is shown within the large circle, the
calibration was successful.
Fig. 48 Calibration screen
Press the Factory settings button and confirm the following confirmation prompt:
Tools
67