4.
Remove the fingerprint reader from the computer (4).
Reverse this procedure to install the fingerprint reader.
Fan
To remove the fan, use this procedure and illustration.
Table 5-8
Fan description and part number
Description
Fan
Before removing the fan, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover
3.
Remove the battery (see
Remove the fan:
1.
Disconnect the fan cable from the system board (1).
2.
Remove the three Phillips M2.0 × 4.0 screws (2) that secure the fan to the computer.
(Preparation for disassembly on page
(Bottom cover on page
Battery on page
32).
30).
Component replacement procedures
Spare part number
M14317-001
30).
39