Table of Contents
Advertisement
To replace the battery, reverse the removal procedures.
Solid-state drive
To remove the M.2 solid-state drive, use this procedure and illustration.
Table 5-3
Solid-state drive descriptions and part numbers
Description
1 TB, PCIe
1 TB solid-state drive + 32 GB Optane memory
512 GB, PCIe
512 GB solid-state drive + 32 GB Optane memory
256 GB, PCIe
256 GB solid-state drive + 16 GB Optane memory
Before removing the solid-state drive, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover
3.
Remove the battery (see
Remove the solid-state drive:
1.
Remove the Phillips M2.0 × 2.5 screw (1) that secures the drive to the computer.
2.
Pull the drive away from the socket to remove it (2).
To install the solid-state drive, reverse the removal procedures.
NOTE:
Solid-state drives are designed with a notch to prevent incorrect insertion.
34
Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
(Bottom cover on page
30).
Battery on page
32).
Spare part number
L85370-005
L85374-005
L85364-005
L85366-005
L85354-005
L85356-005
30).
Advertisement
Table of Contents
