Epson ONYX RIP Manual page 22

Epson Manual for RIP Printing (ONYX RIP)
C
In the Quick Sets tab, click New.
D
Input the Quick Set Name.
We recommend using a name that is easy to understand for the other person that is printing something.
E
Clear (1) and do the print settings in (2) and (3).
If you plan on printing immediately after doing the settings, in (2), be sure to select the same media and the
media setting values (the media setting of the media on which you are going to print now) that are selected on
the printer's control panel. See below for the parameters for (3).
How to Read Print Mode
In the following settings, the print data (input resolution of 360 dpi) undergoes output processing at 720 x 1440
dpi and is printed in 32 passes. The following table describes the meanings of the setting names
C.
A
Indicates the input resolution. You can select either 360 or 720 dpi.
Preparations for Printing
22
A
through