Panasonic KX-TC1871ALB Operating Instructions Manual page 94

" Before Requesting Help
Problem
You cannot program items,
such as the dialling mode.
Previously programmed
information is erased.
"Recharge battery" is
displayed, "
the unit beeps intermittently.
You charged the battery
fully, but "Recharge
battery" is still displayed
and/or "
flash.
The IN USE/CHARGE
indicator light does not go
out while charging.
For New Zealand Customers
Panasonic New Zealand operates a toll free Customer Support
Centre.
Please phone 0800 Panasonic (0800 726276) for assistance.
94
≥Programming is not possible while the
≥Do not pause for over 60 seconds while
≥Move closer to the base unit.
≥
≥If a power failure occurs, programmed
≥Charge the battery fully (p. 15).
" flashes or
≥Clean the charge contacts and charge
≥Install a new battery (p. 88).
" continues to
≥This is normal.
Cause and Remedy
unit is in the talk or speakerphone
mode, when viewing the Caller
List/directory list, or while the answering
system is in use.
programming.
(›) (‹) BACK (fi)
, ,
may have been pressed when you
picked up the handset. Press
(FUNCTION/EXIT/CH)
information may be erased. Reprogram
if necessary.
again (p. 16).
FWD/EDIT (fl)
or
and try again.