Panasonic KX-TC1871ALB Operating Instructions Manual page 71

(FUNCTION/EXIT/CH)
1
Press
(›)
2 Press or
points to "Program".
FWD/EDIT (fl)
3
Press
(›)
4
Press or
points to "TAD program".
FWD/EDIT (fl)
5 Press
≥The base unit display shows the answering
system function menu.
(#)
6 Press .
7 Enter your pager number, and press
the access code, if required by your pager company, and press
(REDIAL/PAUSE)
≥The entered number is displayed on the base unit.
≥If you misdial, press (INTERCOM/CLEAR) and enter the correct number.
≥You can enter a total of 44 digits.
FWD/EDIT (fl)
8
Press
≥A beep sounds.
≥To return to the standby mode, press (FUNCTION/EXIT/CH).
* Pager companies require a delay after the pager number and/or
the access code is dialled. Contact your pager company regarding
the required pause time. Pressing
3.5 second delay and counts as one digit.
.
(‹)
repeatedly until the arrow
(Yes key).
(‹)
repeatedly until the arrow
(Yes key).
twice again.*
(Save key).
Ringer volume
1Program
4 3
1Save DIRECT#
Set recall time
4 3
1TAD program
4 3
Answering
system setting.
See base unit.
Base unit display
Enter pager no.
(REDIAL/PAUSE)
(REDIAL/PAUSE)
once creates a
"
1=Yes
1=Yes
1=Yes
twice.* Enter
71