Pager Mode Setting - Panasonic KX-TC1871ALB Operating Instructions Manual

" Pager Call

Pager Mode Setting

After subscribing to a Caller ID service (p. 36), you can select one of
the following pager mode settings. The unit will alert your pager:
Recorded MSG: After the unit records an incoming message
OR
Received call:
If you want to change the mode, proceed as follows.
(FUNCTION/EXIT/CH)
1 Press
(›)
2
Press
points to "Program".
FWD/EDIT (fl)
3 Press
(›)
4 Press
points to "TAD program".
FWD/EDIT (fl)
5 Press
≥The base unit display shows the answering
system function menu.
(6)
6 Press .
≥The current setting is displayed on the base
unit.
7 To select "Received call", press
OR
To select "Recorded MSG", press
FWD/EDIT (fl)
8 Press
≥A beep sounds.
≥To return to the standby mode, press (FUNCTION/EXIT/CH).
≥If you select "Received call" and set the unit to call your pager (p. 75), the unit
will alert your pager even if the answering system is not turned on.
≥Even if you select "Received call", the unit will not alert your pager when a
Caller ID call which does not have a phone number is received and the caller
does not leave any message.
74
(factory preset),
Each time the unit receives a Caller ID call, even
if the caller does not leave a message.
.
(‹)
or repeatedly until the arrow
(Yes key).
(‹)
or repeatedly until the arrow
(Yes key).
(Save key).
Ringer volume
1Program
4 3
1Save DIRECT#
Set recall time
4 3
1TAD program
4 3
Answering
system setting.
See base unit.
Base unit display
Pager mode
:Recorded MSG
(2)
.
(1)
.
1=Yes
1=Yes
1=Yes