Panasonic KX-TC1871ALB Operating Instructions Manual page 64

" Special Features
(FUNCTION/EXIT/CH)
1
Press
(›)
2 Press
points to "Program".
FWD/EDIT (fl)
3 Press
(›)
4 Press
points to "Set recall time".
FWD/EDIT (fl)
5 Press
(›)
6 Press
the desired time is displayed.
FWD/EDIT (fl)
7
Press
≥A beep sounds.
≥To return to the standby mode, press (FUNCTION/EXIT/CH).
≥You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).
≥Users in Australia can access Telstra's "EASY CALL" service by having
the recall time set at 100 msec (this is the factory default setting), and then
follow Telstra's "EASY CALL" instructions to operate this service.
≥If you are connected via a PBX, a longer or shorter recall time may be necessary
to use PBX functions (transferring a call etc.). Consult your PBX supplier for
the correct setting.
For Call Waiting Service Users in New Zealand
Make sure the recall time is set to 600 msec for use with Telecom's
Call Waiting Service. Press
hear a call-waiting tone while talking.
≥The first call is put on hold and you can answer the second call.
≥To return to the first caller, press (RECALL/PLAYBACK) or (RECALL)
again.
≥Your telephone company may not support the second caller display
feature.
64
.
(‹)
or repeatedly until the arrow
(Yes key).
(‹)
or repeatedly until the arrow
(Yes key).
(‹)
or repeatedly until
(Save key).
(RECALL/PLAYBACK)
Ringer volume
1Program
1=Yes
4 3
Save DIRECT#
1Set recall time
1=Yes
4 3
Recall time
:100ms
1=Save
4 3
(RECALL)
or if you