Assigning Functions To The Controller - Casio Exilim EX-M1 User Manual

OTHER RECORDING FUNCTIONS
IMPORTANT!
• The monitor screen turns back on automatically in the
following cases, even if "LCD-OFF" is selected with
the above procedure.
— When you press MENU (Monitor screen remains
on for about one minute.)
— When you rock the controller left or right
— When you enter the Movie Mode or Voice Record-
ing Mode for recording
— When you use the Snapshot Audio Mode to add
audio to a snapshot

Assigning Functions to the Controller

A "key customization" feature lets you assign a setting func-
tion to the controller. After you assign a function, the corre-
sponding parameter is changed whenever you rock the con-
troller left or right in the REC mode.
1.
In the REC mode, press MENU.
2.
Select the "REC" tab, select "L/R Key", and
then rock the controller to the right.
3.
Rock the controller up or down to select the
setting you want, and then click.
When you want to assign this
function to the controller :
Recording mode
• Rock left or right to cycle through
modes.
• EX-S1: Snapshot, Nignt Scene,
Movie
• EX-M1: Snapshot, Nignt Scene,
Movie, Snapshot Audio, Voice
Recording (page 104)
Exposure compensation
• Rock left to decrease, rock right to
increase (page 42)
Flash mode
• Rock left or right to cycle through
modes (page 37).
White balance mode
• Rock left or right to cycle through
modes (page 43).
NOTE
• The initial default setting is "REC Mode".
51
Select this:
REC Mode
EV Shift
Flash
White Balance